isuzu trooper 3.0d 4jx1 DTC P1649

[klonone]

hello .please i have code error P1649
DTC P1649: Immobilizer Security Code Not Programmed
please how to programm??
thanks

[Odin68]

hello .please i have code error P1649
DTC P1649: Immobilizer Security Code Not Programmed
please how to programm??
thanks

Hi, I have the same problem as you, have you found a solution?

Thank you

[Odin68]

Hello, I'm still looking for this solution.
Someone would he do that
Thank you

[klonone]

hello, with t300 program new key and extract pin

regards

[Odin68]

hello, with t300 program new key and extract pin

regards

hello, thanks for the info.
I will buy a T300 to try.

regards

[jackaroo ted]

hello, thanks for the info.
I will buy a T300 to try.

regards

Did the T300 allow you to extract the Security PIN from your 3.0L Isuzu Trooper?

[klonone]

Did the T300 allow you to extract the Security PIN from your 3.0L Isuzu Trooper?

yes, you can

[jackaroo ted]

Do you know if anyone has actually done it - extracted PIN from 3.0L Isuzu Trooper 4JX1? Because I have an MVP with unlimited tokens which is supposed to read the PIN for an OPEL TROOPER / HOLDEN JACKAROO / ISUZU TROOPER, but it doesn't work, hence why I am reluctant to buy another device if it doesn't actually work?

[klonone]

T300 work 100%

[jackaroo ted]

T300 work 100%

Well I received my T300 today from aliexpress and it WILL NOT read the Immobilizer PIN from an Isuzu Trooper (1998-2004) with 4JX1 4 cylinder Turbo Diesel Engine!
The vehicle is listed, and it will allow me to read stored Error codes, program keys, clear keys etc....but will not allow you to read the PIN. So you MUST know your PIN otherwise this key programmer is useless.

[Bllinda]

Hi, you can find the pin code in the case behind the glove box.
You have to read the chip, you will have a dump of 512 KB, and open it with a program to find the code.
I can not remember the name of the program, but if you need it I can give it to you.
immobox in.jpgimmobox out.JPG

so it always happens . Read MW and be known ....

Well I received my T300 today from aliexpress and it WILL NOT read the Immobilizer PIN from an Isuzu Trooper (1998-2004) with 4JX1 4 cylinder Turbo Diesel Engine!
The vehicle is listed, and it will allow me to read stored Error codes, program keys, clear keys etc....but will not allow you to read the PIN. So you MUST know your PIN otherwise this key programmer is useless.

[Bllinda]

what kind of reason is the second picture of the uploud .... what you think

[jackaroo ted]

Being a newbie, I'm not exactly sure what you are referring to - Sorry? But if you are referring to the picture of an Isuzu Trooper showing the location of the Immobilizer, then I already know where it is, as I have removed several of them from various Isuzu Troopers / Holden Jackaroos over the last few years, but that will not tell me the PIN code - hence the reason why I feel the need for a T300. I already have the latest version of the Autokey MVP (Token Free version) which is supposed to extract the PIN from the ECU or Immobilizer on these vehicles, but it doesn't actually do it. I have tried the Isuzu Trooper, Opel Trooper, Opel Monterey, and Holden Jackaroo from the MVP menu, but it cannot read the PIN.

[Odin68]

Hi, you can find the pin code in the case behind the glove box.
You have to read the chip, you will have a dump of 512 KB, and open it with a program to find the code.
I can not remember the name of the program, but if you need it I can give it to you.
immobox in.jpgimmobox out.JPG

[jackaroo ted]

Yeah, I was hoping there was another way of obtaining the PIN digitally, without requiring chip readers.
So the T300 didn't read the PIN from the ICU in the Isuzu Trooper?
My Chinese clone Autokey MVP couldn't read it...