You mean remote? Depend on year of production.
1998-2001 - 1J0959753 A/N
2002- 1J0959753 CT / AG
You mean remote? Depend on year of production.
1998-2001 - 1J0959753 A/N
2002- 1J0959753 CT / AG
andreia67 (5th September, 2020), mrnixdorf (9th October, 2018), ramiz auto lock (11th October, 2018)
Thx, its a 2002 model, tried the 1j0959753ct 2 buttons, wont go for programation
In vcds
I have 0 instead of 1 in field 3... By following this:
Select]
[17 - Instruments]
[Meas. Blocks - 08]
Group 022
[Go!]The value in field 3 must be 1. If value is not 1, the key is not capable of being adapted to Immobilizer.
For more info, the car was immo off start with a key without transponder, switched to immo on and trying to program a new key without success
I would appreciate any help guys
EMCE159 (13th October, 2018)
the key won't be programmed, i got the pin code
i'm trying to program the key when immo on not off
Anyone experienced the same issue?
your vcds clone is bad...
mrnixdorf (13th October, 2018)
Are you using the right transponder? Brand new id48?
Inviato dal mio HTC 10 evo utilizzando Tapatalk
Im following this tuto using vcds
http://wiki.ross-tech.com/wiki/index...hing_(Cluster)
But on this part :
Select]
[17 - Instruments]
[Meas. Blocks - 08]
Select Block 022.
[Go!]
The value in field 3 must be 1. If value is not 1, the key is not capable of being adapted to Immobilizer.
You can check each key in this manner.
I have 0 on field 3 not 1, thats mean the key wont be programmed, the bad thing is that i have only this new key, i dont have other keys to test or transponders.
Im trying to program the key for immo not for remote, and yes the key is new
Bookmarks