TM 9100 Super Hanging

[deeco]

I tried to flash my technomate with lastest ur image now it just hangs on boot wiith ur logo and display just going around and around

tried re-flash with serial cable doesn t seem to connect can connect to dreambox but

i was flashing over the network but network port is dead also

bo just powers straight on when flick the power
any pointers would be great

[dick b]

not sure if this will help as it may be what you are already trying this is thanks to "digidude"

[deeco]

ill try it and let you know thanks

[deeco]

:proud:cheers thats the ticket

[cl163]

I got similar problem on my TM-9100.The box just hang on the UR Logo.If I installed the Technomate Image then it would work OK.I didn't see any suggestion from Dick B above.Thanks!

[dick b]

I got similar problem on my TM-9100.The box just hang on the UR Logo.If I installed the Technomate Image then it would work OK.I didn't see any suggestion from Dick B above.Thanks!

yeah thats an old post but this is what I sent him

[cl163]

Thank you Dick for uploading the Link again.I had no problem with Reflashing by Serial.I have tried a few UR images,and the box hangs on reboot.Is there anyway I can force a Reboot after reflashing? The box reflashed OK with Technomate image,so assumably there is nothing wrong with the Flash IC,isn't it? Is there a bug on the UR images?

[cl163]

I have found a solution to the Hanging on Reboot after Reflashing.This results from a corrupted Uboot image.The problem can be resolved by Reflashing the original TM-9100_Serial_005 Uboot image into the box using the Serial Null Modem method and the box would boot again.Hope this information would be of any help to someone