View Full Version : Sid 306 eeprom crc calculation
levisdj
12th February, 2024, 12:33 PM
Hi, please help with eeprom crc calculation after mileage mod in dump. Never had a issue with bosch ecus but siemens seems that my tools don't support. Attached org and mod, thanks!
fww1
12th February, 2024, 04:31 PM
what mileage is needed, I'll try to change it in the original
levisdj
12th February, 2024, 04:42 PM
199018 is shown onto the odometer
Had read with Xtool 448924, 448906 and 357490
fww1
12th February, 2024, 05:05 PM
pass pm...............
eliet2000
12th February, 2024, 05:07 PM
Original = 448906 km ?
Mod = 199.018 km ?
Algoritm = CRC-16/X-25 in VIN block
55553148534441434E3435373031323131B9F2 CRC-16/X-25 in swap bit
levisdj
12th February, 2024, 05:13 PM
fww1, thanks for your effort, but it seems that your mod wiped out the whole eeprom.
@eliet2000 (https://www.digital-kaos.co.uk/forums/member.php/271343-eliet2000) would you be nice enough to give an example ? the values are good, but it's the other way around
levisdj
13th February, 2024, 07:13 AM
I'm sorry, I did a few tests with the example above, but there's a no go. Can someone help calculate the crc in eep v2 please? Thanks
fww1
13th February, 2024, 07:41 AM
what is the error when writing the mod?when editing eeprom control does not change
levisdj
13th February, 2024, 08:00 AM
Car starts and runs rough with alot of smoke! 100% crc error as I had a few megane in the past with sid307... so need correct crc calculation
fww1
13th February, 2024, 08:10 AM
when editing eeprom CRC does not change
fww1
13th February, 2024, 08:12 AM
try to record the original eeprom, see how the car behaves
levisdj
13th February, 2024, 08:18 AM
As stated, normal no smoke, runs as its supposed to....
MartiLer
13th February, 2024, 09:06 AM
I can manually calculate the checksums in the eeprom dump if this is still relevant.
levisdj
13th February, 2024, 10:40 AM
Yes friend, still need!
eliet2000
13th February, 2024, 11:09 AM
Your corrected file, regards.
Hayssam1
13th February, 2024, 02:49 PM
Hi, please help with eeprom crc calculation after mileage mod in dump. Never had a issue with bosch ecus but siemens seems that my tools don't support. Attached org and mod, thanks!
The file you did still doesn't match the mileage, a silence hides the original mileage 448900km
ecu 237101082R
I made you a new file, you can try it 199018 KM
levisdj
13th February, 2024, 04:36 PM
All good, thx and rep added. Thanks alot!
Hayssam1
13th February, 2024, 07:57 PM
you are welcome
Panathaole
13th February, 2024, 09:20 PM
i don't remember to need to fix cks in the area were the mileage is stored...... (renault nissan sid305 306...)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.