View Full Version : ALFA ROMEO 156 EDC15C7 IMMO
cseko
12th June, 2024, 06:41 AM
Hi.
Please help me anybody!
I need delete immo from edc15c7 Alfa Romeo 156 ecus.
0281 010 335
I have a full flash dump.
Thx!
lukkru
12th June, 2024, 07:41 AM
Hi,
Try this.
Regards
Luk
cseko
12th June, 2024, 11:10 AM
Hi,
Try this.
Regards
Luk
THX BUT NOT WORKING...
automobile
12th June, 2024, 12:22 PM
try this .....
Hayssam1
12th June, 2024, 12:50 PM
Hi.
Please help me anybody!
I need delete immo from edc15c7 Alfa Romeo 156 ecus.
0281 010 335
I have a full flash dump.
Thx!
try this file and let me know
Disconnect immo box or antenna
cseko
14th June, 2024, 09:47 AM
dont working...
Any idea?
please help me!
thx
gwiazdamb
14th June, 2024, 10:07 AM
dont working...
Any idea?
please help me!
thx
Immo box must be disconnected or code line
If it doesn't work, your problem is not the immo
Look for faults in the cables, fuses, relays, ECU power and ground
It's best to have the installation diagram handy and ready to go
cseko
14th June, 2024, 12:06 PM
Immo box must be disconnected or code line
If it doesn't work, your problem is not the immo
Look for faults in the cables, fuses, relays, ECU power and ground
It's best to have the installation diagram handy and ready to go
I disconnected immo box but car dont start. I readed fault with Bosh KTS and the parameters i see: Immo status: Active and Car start enabled: No
I think the problem are IMMo...
gwiazdamb
14th June, 2024, 02:41 PM
I disconnected immo box but car dont start. I readed fault with Bosh KTS and the parameters i see: Immo status: Active and Car start enabled: No
I think the problem are IMMo...
What programmer do you use for reading and writing
Autronico2
14th June, 2024, 02:59 PM
I disconnected immo box but car dont start. I readed fault with Bosh KTS and the parameters i see: Immo status: Active and Car start enabled: No
I think the problem are IMMo...
Listen, I immo'd you off as I always do on these cars, I don't know how other users processed the file, but after all these versions that didn't work, I think your problem is somewhere else, check carefully the power supplies and the main relay.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.