starview 5 help

[belfastdaren]

when i have done a factory reset choose english as my language then scanned for channels this reaches 100% then it goes to manual scan if i exit everything after it has finished it takes me back to the choose my language screen which i cant get out of seems to be a continous loop with me not being able to exit

thanks for any help

[satsmo]

Power the box down from the main switch on the back for a minute and then power back up again.

[belfastdaren]

still no joy stuyck in this endless loop

[satsmo]

In the CAS menu, where you see keycode, press default key and try it again. If that fails try a factory reset, rescan and turn keycode back on.

[belfastdaren]

have done the above

[satsmo]

A reflash with V2.03 Digital Kaos - Downloads - TheboxSuperUSB2_v2.03.20090923.BIN (http://www.digital-kaos.co.uk/forums/downloads/starview/23/theboxsuperusb2_v2-03-20090923-bin-902/) should solve the problem but I have seen it sorted before by leaving the box off for a while.

[belfastdaren]

ty m8 i will leave my box off overnight and check in the morn, i will post back to let you know the result

[seanmckeown]

any joy darren?

i'm in belfast and i'm having the exact same problem with my sv4

[belfastdaren]

no joy with reinstalling firmware ( i tried on a different star view 4 as well )

what can virgin have done ?

[belfastdaren]

i rescanned using the chorus settling instead of ntl and all back working :-)

[leeroy 25]

me and my brother both have sv3, we both lost some channels and did a factory reset turned on emu, then automatic scan, mine is working as usaul but his wont pick up any channels when scanning and is stuck in menu

[belfastdaren]

try scanning chorus instead of ntl that worked for me

[satsmo]

Strange indeed as they use 6875 as an SR as opposed to 6887 for N.I.

I know that cards are at the moment been issued in your area and that VM are aligning networks but glad it has worked out for you. Hopefully you will get a while longer.

[leeroy 25]

cheers worked on chorus