Programing Chrysler 300C Fail.

[shaykie]

So i tried programing a 2005 Chrysler 300C Today and i failed.
i was using the Chinese Version of the MVP i had the right pin code but at the end it gave me A Challenge code and asked me for a alphanumeric code.
i found some info right here http://spidometrs.ru/s2/download/Chrysler_Manual.pdf
and it says that the code will be obtained Form Advanced diagnostic.
is there a way around that?
i'm Getting my new SBB tomorrow :ridinghorse: will that be able to program a key W/O A challenge code?

Thanks!

[Automat]

So i tried programing a 2005 Chrysler 300C Today and i failed.
i was using the Chinese Version of the MVP i had the right pin code but at the end it gave me A Challenge code and asked me for a alphanumeric code.
i found some info right here http://spidometrs.ru/s2/download/Chrysler_Manual.pdf
and it says that the code will be obtained Form Advanced diagnostic.
is there a way around that?
i'm Getting my new SBB tomorrow :ridinghorse: will that be able to program a key W/O A challenge code?

Thanks!

Others have posted unsuccessful results with Chrysler using the SBB, but I believe SBB does not ask for challenge codes.

[shaykie]

Others have posted unsuccessful results with Chrysler using the SBB, but I believe SBB does not ask for challenge codes.

If the SBB is a fail with Chrysler cars what Would be the best programing tool for chrysler?
i own a MVP, SBB Both are pretty unreliable but you get what you paid for... and i'm willing to buy anything (as long as i can find a Chinese version of it) :bike: that will allow me to program Chrysler cars.

Thanks!

[brightlockandkey]

I have a t300 that does chysler but it did not work till I got the right adapters. never had a car with challenge codes though. but worked great on cars I have done so far mostly type 2 and pacifica systems

[shaykie]

I have a t300 that does chysler but it did not work till I got the right adapters. never had a car with challenge codes though. but worked great on cars I have done so far mostly type 2 and pacifica systems
Thanks,
Any idea what cables are they?
is it the original advanced Diagnostics cables? ADC138 And ADC139?
Those cables are at about $190 per cable, expensive but if it works it's totally worth it.

Thanks again, and if you can forward me to where i can get the cables from id greatly appreciate that.

[brightlockandkey]

well I just have the adapters not whole cables. I will send you a message with where I got them.

[gojko]

I have the original SBB and is required to pin that I'd programmed