Alternator Voltage Regulator How to Test??

[kizagt]

Hi to all!!
How to test Voltage regulators from example from Ford Mondeo 1.8 tdci with 3 pin conector?

[dopsleutel13]

Voltage Regulator Test | eHow.com (http://www.ehow.com/voltage-regulator-test/)

look here on the greatest manual on the internet !
Al clear explaned for the car specialist .
http://members.chello.nl/j.habraken2/lachen.gif
Succes

[nutloose]

1) check battery voltage
2) start engine and re-check
3) remove 3 pin plug and check again

clear fault codes with diagnostic tool if output checks out OK

The "smart" alternator will work as a standard alternator if you remove the 3 pin plug. (genuine one only NOT spurious)

One of the wires to the three pin plug breaks give them a pull test.

[Meat-Head]

1)

The "smart" alternator will work as a standard alternator if you remove the 3 pin plug. (genuine one only NOT spurious)

One of the wires to the three pin plug breaks give them a pull test.

holds at 13.8 second above

Meat

[d.zio]

IF YOU WANT TO CHECK THEM OUTSIDE OF THE CAR.......LIKE A SPARE PART.........YOU CANT........!!!!ON THE CAR.....
1 CHECH BATTERYS VOLTAGE
2 START THE CAR AND TEST AGAIN....IF THE REGULATOR IS GOOD YOU MUST HAVE 13.8 TO 14.5 (DEPENDING OF THE CAR)