Frozen Image on Sagem 1 Dbox

[idekuk]

Newbie my 1st post. Could someone please help me ,
Image on box is Lincsat7.251x and has frozen on start up after I tried to flash lakys-sylas-2x by mistake.Now cant get original image to budge.
What have I done?:help:

[BoomBoom]

Youll need to use IFa and re-flash it, lots of info out there on doing it, just make sure its the correct image chip size either 1x chip or 2x chip

[idekuk]

Thanks for reply but I have tried that and it will not go anywhere after image says loading kernal

[MetMan]

Thanks for reply but I have tried that and it will not go anywhere after image says loading kernal

u ain't dun it right then......1695

[BoomBoom]

Instructions to Flash a box

you will need to get hold of a few items to sucesfully flash your box

1. A cross over cable (not to be confused with a patch lead)
2. A Null Modem Lead (can be bought in all the usual places)
3 Some sort of flashing utility (i use IFA)
4 Pc or lappy (turned on)
5 Dbox2 (turned off)

Connect the leads from the network card in the pc to the box
make sure the network card is either set to auto detect/negotiate
or set to 10 mbits half duplex

turn off any firewalls as this can slow the process

Connect the null modem lead from Pc to Box

Run software setting up the modem port (either com1 or com2)

Choose the correct image (either 1 chip or 2 chip)
And press the start button on the software
Once its done its checks it will wait
This is where you put the power cord in the box
after a second or 2 the Tv screen will show the flashing screen
wait till all is finished then close down the flashing program
pull out power cord on box wait 10 seconds then plug in

If you follow all this you should be viewing your new image on your box
now it is a matter of setting location in the settings to your vilage/town
doing a scan (takes between 5 and 50 mins)
and way you go

[idekuk]

Yea got all that, so I,ll just keep trying. Be tomorrow tho as got to go to fottie tonight Thanks again:scarf2:

[BoomBoom]

If you get issues try a diff version of IFA as some work more than others

[idekuk]

have tried everything but box will still not move from image showing Linux ..loading kernal.
getting a bit worried now. Is my box knacked?

[Derekwd]

Did you manage to flash an image to the box, did it finish flashing successfully

Derek

[BoomBoom]

u ain't dun it right then......1695

Groundhog day again i guess

[spankmonkeywill]

mate i have had this before by interrupting the flash process. Make sure you use a program like ccleaner in between attempts and look for the folder created by IFA when you fail to flash successfully. Bin it before another attempt. Its a pain in the a** but its always worth rebooting the comp after continued failed attempts.
Follow the above instructions provided by boomboom. keep the cables out ov the box and power off BEFORE launching IFA

[idekuk]

got worse today. tried to ftp on my other box dbox2 and it has done the same.
both boxes are now stuck on loading kernal. This is now doing my box in if you pardon the pun;;; I have been able to flash any image many times before but this has really
got me puzzled. CAN anyone tell me where I am going wrong. Have been using Flashfxp,
Dbox ifa,total commander,and tried firezilla Heeeeeelp please