DAEWOO LANOS ,im710 ,hybrid ecu

[gadroulll]

i have a daewoo lanos that do not start . after of return the ignition the car starts .

it looks like to be the immobiliser im710 with memory 93c56b.

i use a emulator of ecutool but not work either .

i check memory and the keys exists.
i do not have communication with ecu.

does anyone has similar problem ? is case to be the ecu that do not accept the immobiliser code?

[antlio]

Hi

This emulator don t work in hybrid ecu and like Siemens Fenix 5 with Tms 374 ecu but only in ecu like Siemens sirius 32 which is in Matiz . I tested in the past in all cars Daewoo .

[bugajewski_pl]

Open the ECU, you will find two SOIC8 parts, one of them is the ST 95020 eeprom (it's marked with ST logo). Read and post dump.

[gadroulll]

its hubrid ecu i do not think to see the logo st but just a hubrid memory st.
here id the pdf of emulator i use .the immo box is the same with mine in the car.

has anyone manage to work this ecu with emulator ?

[antlio]

As i said before this emulator don t work in this ecu . I tested in the past . Open the ecu and desolder 8 soic 95020 and upload it . Don t waste your time with this emu .

[gadroulll]

thanks antlio for your time but the customer was on hurry with car and not have time to do this . do you have any photo of ecu opened, original file and immo of file to do this the next time?

[gadroulll]

HERE IS a file 95020 can someone help me?

[gadroulll]

someone can help?

[bugajewski_pl]

Yes ;)
This file should help you.

[IchBins]

Open the ECU, you will find two SOIC8 parts, one of them is the ST 95020 eeprom (it's marked with ST logo). Read and post dump.

Hi m8

i have the same problem. I have opened ecu. I can see two soic 8 chips, but which is the right one? 1 or 2?

regards

[bugajewski_pl]

Number one is 95020.

[IchBins]

ok thanks,

i was not sure, because name 95020 were not.

Here is Dump from 95020.


many thanks in advance

[bugajewski_pl]

Check this file, and report results.

[IchBins]

Thanks!

I will test it on Monday and then report here.

regards

[IchBins]

OK, now after a small accident I am again in top form.

So, it does not work. But it lies, perhaps, in the ECU.
The ECU it is perhaps defective. I have exchanged them together with the Immobox.
The car now work.

Thank you again!

[svelent]

Help me?
Immo off 95020 hybrid ecu

[svelent]

95020 hybrid ecu
The answer will give at once

[svelent]

this dumps KEY and immo
Help me

[bugajewski_pl]

95020 hybrid ecu
The answer will give at once

File with immo off, pass pm.

[burko]

need off for lanos 1.5 Delphi hybrid

thanks in advance
Burko
Macedonia

[burko]

anyone please?
bugajewski_pl help

[gabes]

Hello dear friends.
HERE IS a file 95020 can someone help me? immo off
Deawou Lanos 1.5 delphi-delco

Thanks!

[ChipDoctor]

Check this file, and report results.
Hello my friend

Can you help me please, i have the same ecu from Lanos 1300cc 8V 2001-2 model Hybrid 09388029 DLBZ No.12201599

I read the eprom 95020 but i have not clean dump

Help me please....

Regards

[i_shot_the_sheriff]

Hey mates,

How have you desoldered the 95020 eprom? I've been trying to desolder it for hours but without luck! Is it silver soldering?

[ChipDoctor]

Cut one one the foot with small cutter
WRITE the new file in the eeprom and solder the eeprom, one by one the foot
If you don't have clean dump send me the file to clean
I have remove the immo of the lanos and work ok

[ChipDoctor]

Hey mates,

How have you desoldered the 95020 eprom? I've been trying to desolder it for hours but without luck! Is it silver soldering?

Cut one one the foot with small cutter
WRITE the new file in the eeprom and solder the eeprom, one by one the foot
If you don't have clean dump send me the file to clean
I have remove the immo of the lanos and work ok

[i_shot_the_sheriff]

I am really thankful for your answer,, i will try it

[vladacira]

Please send me pass for immo off file
regards

[jokerrro]

valdacira Give the original file, it is getting off