PDA

View Full Version : Failed update, please help


dibble
21st October, 2011, 10:01 PM
After updating my DM800SE clone to OpenPLi, the box seems not to recognise its tuner. When I go into Setup -> Service Searching -> Tuner Configuration I am presented with the screen shown here.

http://i53.tinypic.com/ih13sw.jpg

I've reseated the tuner - although it wasn't loose. It made no difference. The DM hasn't been bumped, jumped, humped or thumped. Every other function works (so far as I can tell) as it should. It just doesn't seem to think it has any tuners installed.

The image I installed was: OpenPLi-2.1-beta-dm800se-20111015.nfi and I have the SSL84 bootloader on the box. It's my opinion that this is 100% a software problem, not a hardware problem or a problem with the tuner.

Can anyone offer some suggestions about what software or drivers I may need to install/upgrade to turn this box from an expensive doorstop back into a satellite receiver?

Thanks

http://imageshack.us/photo/my-images/812/tunerasmall.jpg/
alom5
21st October, 2011, 10:03 PM
its a bad flash mate. flash another image it will be working fine. you can come back to the openpli after
smirnoff_rules
21st October, 2011, 10:06 PM
Is there a clone safe image for this ?
alom5
21st October, 2011, 10:16 PM
theres loads mate...there a sticky about it and i uploaded a few in the downloads section as well.
southpaw
21st October, 2011, 10:32 PM
Try to download tuner drivers from download panel or tspanel
dibble
21st October, 2011, 10:51 PM
its a bad flash mate. flash another image it will be working fine. you can come back to the openpli after
...
theres loads mate...there a sticky about it and i uploaded a few in the downloads section as well.Now here's a guy who knows what he's talking about :top:

I pulled a copy of Newnigma2 per. your link and that sees the tuner AND is currently scanning 28.2E.

As a footnote, before flashing the OpenPLi version I took, I tried maybe 5 or 6 other links to OpenPLi images. A lot of those links were dead (even though they were less than a month old). One that I unrar'd turned out to be corrupted and another which called itself *dm800se* turned out to be the wrong architecture. So far, I'm less than impressed with OpenPLi - even the one image that did flash successfully didn't work
sikko
30th December, 2011, 08:12 PM
Having similar problem. After online update tuners are gone.
I will try your solution and download new firmware.