DAEWOO MATIZ Blocked by Immobilizer

[spiridonas]

Hi guys when connect the diagnostic tool (kts640) to DAEWOO MATIZ says fault: Blocked by Immobilizer
uploaded two dumps from ecu 29f200 and from immo 93LC56.
Please i need to remove this fault will start the car.
Many thanks in advance.

[lupu_sandu]

Make key using SBB or T300 via OBD2.

[spiridonas]

Hi i don't have SBB or T300 can you modify the dump to start the car or can you make immo off.
Many thanks.

[lupu_sandu]

No immo off AFAIK m8.

[vanos batam]

Hi guys when connect the diagnostic tool (kts640) to DAEWOO MATIZ says fault: Blocked by Immobilizer
uploaded two dumps from ecu 29f200 and from immo 93LC56.
Please i need to remove this fault will start the car.
Many thanks in advance.

ID48 - JMA TP08 - SILCA T6
Daewoo/Chevrolet
The transponder is locked!
ID: 80A4F0B0
UP: 12498779

[spiridonas]

ID48 - JMA TP08 - SILCA T6
Daewoo/Chevrolet
The transponder is locked!
ID: 80A4F0B0
UP: 12498779

with this dump can start the car?

[vanos batam]

with this dump can start the car?

ID48 - JMA TP08 - SILCA T6
ID: 80A4F0B0

try above dump...
write to ID48

[gadroulll]

if the ecu has blocked by immo you should not diagnose to ecu .
remove from a working car immo and key put it on your car and make diagnose .
after that you can use sbb ot t300 to program keys on your immobox .

the best away is to use a emulator and collect your money

[spiridonas]

I tried with Daewoo emulator and remove immo box but car not start.

[igorr]

I have had same problem and solution is to reset ecu and program keys.I did that vith mvp clone

[mark80]

i have same problem with audi a3 . don't know how to reset ecu.
Good luck.

[gadroulll]

the chinese emulator not works .only from immolab

[carmansk]

the chinese emulator not works .only from immolab



yes you are right china is ****ing emulator !!!!!!!!!! ****ing china clone!