PDA

View Full Version : BMW E90 CAS2 XPROG



topepi
28th March, 2012, 02:27 AM
Hello
I have problem with CAS2 BMW e90 2006
read by xprog-m (ELDB) MC9S12DG256 2K79x . i reset value km and the car no start :(

Maybe cas is dead or maybe is my flash is corrupted

i need full flash for this cas please :

61.35 - 6 981 416
CAS 2 ( E8x/E9x )
MCV-0.0.0 / FSV-6.2.6 / OSV-3.3.0 / RTV-0.0.0 /
HW.-03 / SW.-27.1 / COD.-05 / Diag.-INDEX-6A0
SIEMENS VDO : 5WK4 9412LBF

i post eeprom and flash if you can check it ?

Thanks in advance :giveup:

mitext
28th March, 2012, 06:45 AM
I think the problem is in the eeprom. there ACC?

topepi
28th March, 2012, 07:56 AM
yes ACC and ignition work

micromax
28th March, 2012, 08:50 AM
try disconnect car battery for 5 min.i have same cas dump. here you have.

topepi
28th March, 2012, 08:55 AM
I resolved my problem .
the problem are on car sensor .
http://www.digital-kaos.co.uk/forums/[IMG]http://i39.tinypic.com/27wt4rk.jpghttp://i39.tinypic.com/27wt4rk.jpg
http://www.digital-kaos.co.uk/forums/%3Ca%20href=%22http://tinypic.com?ref=27wt4rk%22%20target=%22_blank%22%3 E%3Cimg%20src=%22http://i39.tinypic.com/27wt4rk.jpg%22%20border=%220%22%20alt=%22Image%20a nd%20video%20hosting%20by%20TinyPic%22%3E%3C/a%3E


thanks for help

joubliss
28th March, 2012, 09:30 AM
ur dump look fine.

VIN : WBAVC11060VE08006
Odo : 273123 km
Mechanical code: 0386

and u have 3 keys used. 2 remotes and 1 pcf7936.

peko
28th March, 2012, 09:40 AM
I resolved my problem .
the problem are on car sensor .
http://www.digital-kaos.co.uk/forums/[IMG]http://i39.tinypic.com/27wt4rk.jpghttp://i39.tinypic.com/27wt4rk.jpg
http://www.digital-kaos.co.uk/forums/%3Ca%20href=%22http://tinypic.com?ref=27wt4rk%22%20target=%22_blank%22%3 E%3Cimg%20src=%22http://i39.tinypic.com/27wt4rk.jpg%22%20border=%220%22%20alt=%22Image%20a nd%20video%20hosting%20by%20TinyPic%22%3E%3C/a%3E


thanks for help

which sensor ?

topepi
28th March, 2012, 09:46 PM
sensor or transmitter
http://i40.tinypic.com/2lj6qyu.jpg

on pedal clutch , needed press on it for start your engine . i see the connection are bad and broken , previously have people disassemble it bad work .

nanux
30th September, 2013, 10:46 AM
Hi , Corrupted flash while reading eeprom. 4 post flash give error for start/stop button. Flash from 1 post work perfect. Same symbols on the CAS sticker.

Thanks lads.