PDA

View Full Version : ecu program OPEL CORSA with OP-COM


marcoco
7th May, 2012, 08:29 PM
Hi,i have to change opel corsa 1,7 dti ecu 09389429 .
I have buy an other,already programmed with my car infos:

Car Reg&Chassis number
Make/Model of Car
Has the car got ABS
Brakes
Has the car got Aircon
Has the car got Traction control
Has the
car got Cruise Control
Is the car an Auto or Manual transmission
Does the
car have a standard Vaux Alarm fitted ?


Now i have to fit in car and program with the immobilizer with op-com.
It's my first time,could you explain me the right procedure,please
duco
7th May, 2012, 09:34 PM
Hi, if you have carpass you can go to engine page with opcom than reset ecu. After on the immobilizer page select programming function, insert the pin code and you can find the command to sincronize immo with the engine ecu. Bye!
MJRVR
7th May, 2012, 09:36 PM
Hello
Edited as Im too slow again.

Martin



QUOTE=marcoco;1550060]Hi,i have to change opel corsa 1,7 dti ecu 09389429 .
I have buy an other,already programmed with my car infos:

Car Reg&Chassis number
Make/Model of Car
Has the car got ABS
Brakes
Has the car got Aircon
Has the car got Traction control
Has the
car got Cruise Control
Is the car an Auto or Manual transmission
Does the
car have a standard Vaux Alarm fitted ?


Now i have to fit in car and program with the immobilizer with op-com.
It's my first time,could you explain me the right procedure,please[/QUOTE]
kar407
13th May, 2012, 11:49 PM
I always use orv commander to know the pin code and reset any used ecu . orv work very well for opel
MJRVR
15th May, 2012, 09:55 PM
Hi Kar407
Can you recommend a good supplier for the orv commander?

Thanks
Martin


I always use orv commander to know the pin code and reset any used ecu . orv work very well for opel
tedidj
15th May, 2012, 10:05 PM
ecu pin reader
SMOK (http://www.smok.com.pl/index.php?lang=pl&id=oferta&kategoria=2&produkt=21)
schumy1502
20th May, 2012, 09:48 AM
search the garage end you wil find the how to match ECU
NickB355
14th June, 2012, 11:11 PM
Thanks you
rowiweb
26th June, 2012, 02:50 PM
:manuscarf:
Multipla
23rd September, 2012, 05:47 PM
An the ept for program smoke wath is?
daniersms
23rd September, 2012, 06:05 PM
Opcom works well the trick is that you must know the pin for the immo and the pin for the ecu to reset them both.Small things like security wait time can catch you out if you dont look out.T300 can read immo pin from immo and you can read and post dump from 25C320 in ECU to get pin for ECU