TP.dbs File

[romdut]

my current tp.dbs file has the sky TP and im doing a scan for 23.5 Astra also but the scan only picks up the sky channels only.
Correct me if im wrong but aint this the france satellite?
How can i get the astra 23.5 channels without losing the sky ones also?
I have the s11 using a 60cm dish monoblock and it was recently aligned (thursday)
Thanks

[nibblitz]

It sounds like to me:

You have not set diseqc control on your box to use monoblock ports
You have incorrectly assumed 23.5e is carrying French TV
You have the wrong type of monoblock

French TV is on 19.2e, there isnt a monoblock that will allow for 28.2e and 19.2e, you would need 2 seperate LNB's and a diseqc switch...

[romdut]

It sounds like to me:

You have not set diseqc control on your box to use monoblock ports
You have incorrectly assumed 23.5e is carrying French TV
You have the wrong type of monoblock

French TV is on 19.2e, there isnt a monoblock that will allow for 28.2e and 19.2e, you would need 2 seperate LNB's and a diseqc switch...

You were right about the diseqc not set after a little play around i have them now, many thanks