FY800HD

[kaedetseng]

http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/quote_icon.png Originally Posted by tammytan http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/buttons/viewpost-right.png (http://www.digital-kaos.co.uk/forums/f34/fy800hd-302337-post2056510/#post2056510)
I thought it would be good to share here how I manage to get all the new channels here since I've got PM asking me on how I do it.
1) Make sure you have the latest FW ( file should be FY.AP), not those on pg 7 here.
2) select Menu/ Channel search / Manual search.
3) At Frequency(MHZ) select 128 / 136 / 149 (do one frequency at a time) and Symbol at 6090
4) Before you press ok to search,WAIT for the Quality bar below for signal strength first. If no signal shown, pressing ok will not get you any new channel. (It may take around 5-30 sec before you see the Quality bar showing signal and it may take a few try before you get it.)


Channel 101 to 106 will be shown and 107/108 will be shown as unknownChl
Remember all the new channels will be situated at the back and will not be in correct order. I just save them as FAV for easy access. Hope it helps.




"Thanks so much,able to watch now".
press QAM scan


Able to watch all B P L, mine is HD800-C FYHD, no need to update firmware, But I cannot get all the new channels, H2, Baogu ...

[jerjan]

Manual scan 165 or 166 6090

[kayel]

Mine is the white FY HD800C-ii, a 2012 model. I updated the firmware to the 05082013 one from Lastest Firmware for MVHD/FYHD/TNHD white and black box (http://www.singapore-dreambox.com/lastest-firmware-for-mvhd-fyhd-tnhd-white-and-black-box/) and then fully rescanned the channels.

Happy to report that it receives 224 to 231 as named, but channels 232 and 233 were pushed down to channels 1000+.

But I lost the Okto channel, and cannot manually scan anymore.

Everytime I press manual scan it goes to auto scan and I cannot amend the frequencies.

[tammytan]

Able to watch all B P L, mine is HD800-C FYHD, no need to update firmware, But I cannot get all the new channels, H2, Baogu ...

Freq 163 or 164 sym 6090
CIN HD Bio HD WarnerTV HD H2 HD etc
Freq 156 or 157 sym 6090
BBC HD CNN HD etc

[tammytan]

I have just found out that it is not necessary to upgrade firmware for our 1st gen FYHD as I have just help a friend to search for all new channels using old firmware.

[ignite11]

Dear All,

I am using DM802SE HD, i just updated with the 2 latest firmware for black and white FYHD ( both in .bin format ).
But after update, it ask me to insert card. can only watch FTA.
What should i do now? Anyone know where to get the original .bin for DM802SE HD?

or should i try the update for MVHD which is .abs format? ( Change it to .bin to update )

Thanks for any advise.

[mardybum]

I have just found out that it is not necessary to upgrade firmware for our 1st gen FYHD as I have just help a friend to search for all new channels using old firmware.

that's great! i'm hoping it'll work for the fyhd800c-II.

Seems like i can't get the quality signal to be full when I followed your steps. It'll flicker and then...gone...just like my hopes :(

[neb04]

that's great! i'm hoping it'll work for the fyhd800c-II.

Seems like i can't get the quality signal to be full when I followed your steps. It'll flicker and then...gone...just like my hopes :(


Just to let you all know FYHD800C and FYHD800Cii both are able to successfully scan all the EPL, Lifetime, etc channels using Symbol 6090. S/W versions 2011.02.27 and 2011.03.07 NEED NOT be updated. They'll work. If the Quality bar remains white, exit and try again till it turns to yellow, then press OK to scan. After you enter 6090, you may need to highlight the next item (QAM) before the bar will change color.

Good luck!

[neb04]

:smile:Answer found.

[Puddie]

I thought it would be good to share here how I manage to get all the new channels here since I've got PM asking me on how I do it.
1) Make sure you have the latest FW ( file should be FY.AP), not those on pg 7 here.
2) select Menu/ Channel search / Manual search.
3) At Frequency(MHZ) select 128 / 136 / 149 (do one frequency at a time) and Symbol at 6090
4) Before you press ok to search,WAIT for the Quality bar below for signal strength first. If no signal shown, pressing ok will not get you any new channel. (It may take around 5-30 sec before you see the Quality bar showing signal and it may take a few try before you get it.)


Channel 101 to 106 will be shown and 107/108 will be shown as unknownChl
Remember all the new channels will be situated at the back and will not be in correct order. I just save them as FAV for easy access. Hope it helps.

Thanks! This worked for me. Only small problem is I haven't used this box in ages and can't seem to remember how to add a channel to the favorites list. Hahah. Either that or the function has failed to work on this box. How did you add?

[neb04]

Thanks! This worked for me. Only small problem is I haven't used this box in ages and can't seem to remember how to add a channel to the favorites list. Hahah. Either that or the function has failed to work on this box. How did you add?

Go to Program Edit and key in password (000000). Select the channel you want to add to FAV list. Press FAV button. You will see a kind of red ball marked. Go to next channel and so on. When finished, press EXIT.

[HokkienPeng]

I followed the steps. Upgrade software and scan again. All have. Simple enough and finally figured how to do it correctly.

Mine is FYHD white box (800-IV). Can cancel Mio Stadium once contract expire on Sep.



:party :

Got a few pm so thought I share in details.

Mine is the white one as I posted.
The fw is ************* as posted by senior here.

Make sure your .bin does not reflect vlc or any other program. If not it won't work. I trail and error for many hours that's why I know. Then load into thumb drive and plug in and upgrade.

Once done you are able to manual scan 135000 and 128000 or something like that which is also posted by Tammy. Once you manually scan the 3 given range, you can view all soccer. I had a good time watching chelski trash hull in my room last night.

If you really can't then bring it to me but I charge. Lol. Good luck.

Sincere thanks for all the seniors posting the fw and step by step guide.

[Puddie]

Go to Program Edit and key in password (000000). Select the channel you want to add to FAV list. Press FAV button. You will see a kind of red ball marked. Go to next channel and so on. When finished, press EXIT.

Thanks! I managed to download the manuall and figured it out. Just scrolling the menu to find the channels to add to favorites was quite tedious man. But at least it works and can watch now.

[ong26bj]

Freq 163 or 164 sym 6090
CIN HD Bio HD WarnerTV HD H2 HD etc
Freq 156 or 157 sym 6090
BBC HD CNN HD etc

Hi Tammy,
Manual scan freq 163 sym 6090, able to get CIN HD, BIO HD, etc.

But when I manual scan freq 156 or 157 sym 6090, unable to see any image. Scan able to pick up the channels H2, H2 HD, etc (total 7 channels) but all not showing anything. Noticed that freq stored is 163 sym 6090/256QAM, although I input freq at 156 and 157.

Any idea what went wrong?

[payandwhack]

Hi all, just to share what I have done.

I'm using a HDC-800-IV (white) set and did a FW upgrade. Only after the upgrade, I'm able to enter the 6 digit freq. The old FW only allows up to 3 digits.

What I have done:

Task 1:
1. After the upgrade, did the manual scan of freq 128500, 135500 and 149500. Symbols at 6090. QAM 256.
2. The 'desired' channels were found but all parked right at the end of the channel listings.
3. Showed a black screen and nothing can't be seen or heard.

Task 2:
1. Did a Auto scan with the default freq range but changed the symbol from the default 6875 to 6090.
2. 'Desired channels' appear around the 220ish channel range.
3. BUT, still no sound or image - black screen!

Can anyone advise on this?

[Menifestozz]

Hi guys im new here and read many post regarding FY Hd however I still unable to receive epl chanels. I waited for 30secs to 5min still no signal. I believe I got all other chanels except EPL.

My model as follows:
NAME:HDC800-2
Model: HD-FTA-AVS+DVB-C
SW Version: HDC800 V1.4 TNDT
FW Version: HDC800 V2.0

SW VersionTime: 2012-8-3

Please advice. Do I need to update the software and firmware? I cant seems to update the firmware using FY. At and .Bin help pls.

When I select .bin to ref lash my firmware, the screen flickers and back to channel 101. Unable to proceed to updating screen.

[shidevil]

Hi guys im new here and read many post regarding FY Hd however I still unable to receive epl chanels. I waited for 30secs to 5min still no signal. I believe I got all other chanels except EPL.

My model as follows:
NAME:HDC800-2
Model: HD-FTA-AVS+DVB-C
SW Version: HDC800 V1.4 TNDT
FW Version: HDC800 V2.0

SW VersionTime: 2012-8-3

Please advice. Do I need to update the software and firmware? I cant seems to update the firmware using FY. At and .Bin help pls.

When I select .bin to ref lash my firmware, the screen flickers and back to channel 101. Unable to proceed to updating screen.

Sadly ur model is unable to update.

[Menifestozz]

Sadly ur model is unable to update.

Haix.. I have read in some posts that some using the same model as*Me got their set updated. Some didnt update but able to get the EPL channel. Trail and error for 3 days. Guess i shall just buy dreambox instead. :(

[wongmf]

Hello everyone, I need help!! My box is FYHD-HDC-800e white box! When I tried upgrading the firmware provided by singapore dreambox website, it keeps stuck on boot and there's no image or channel on my TV screen. Can anyone advise?

[DBTraitor]

why dont you first seek the firmware from your seller first. I am sure the seller will give you.
Instead you took the risk of flashing a image you are not sure...

[Bomchacha]

Actually when buying box, always request for a copy of the firmware for SG.
If seller don't want to give, don't buy. There are so many sellers around who are happy to sell you the box.

This is to safeguard you in case your box have problem like now. The firmware does not need to be the latest, but at least something that can revive your box if anything crops up.

I urge all those brothers here to start contacting your seller and ask for solutions. Take this opportunity to test whether they are helpful or they just want to hit and run.

[satsmo]

I also urge you to drop the CAPSLOCK please.

[Polluxti]

Been a while since I was here, so I saw the new firmware out and tried it.. I think I have all the B P L channels, I notice some are at the back 900++ and listed as unknown channels though I'm not into soccer anyway.. The missing channels which I mentioned last time has also been updated. I can now scan the .5hz and am able to receive the newer H2 lifetime channels..

for those who has the same box as this,
215341
the firmware I got was from 13082013-FYHD-Black-usb_upgrade_all_flash.bin (http://www.mediafire.com/download/dgcr7dnx1tx5o5w/13082013-FYHD-Black-usb_upgrade_all_flash.bin)
It is the new firmware but inside the system info it still shows the sw version as 100 but you should now see 2 decimal places (5 digits instead of 3) when scanning the frequency..

[Geeesus]

Been a while since I was here, so I saw the new firmware out and tried it.. I think I have all the B P L channels, I notice some are at the back 900++ and listed as unknown channels though I'm not into soccer anyway.. The missing channels which I mentioned last time has also been updated. I can now scan the .5hz and am able to receive the newer H2 lifetime channels..

for those who has the same box as this,
215341
the firmware I got was from 13082013-FYHD-Black-usb_upgrade_all_flash.bin (http://www.mediafire.com/download/dgcr7dnx1tx5o5w/13082013-FYHD-Black-usb_upgrade_all_flash.bin)
It is the new firmware but inside the system info it still shows the sw version as 100 but you should now see 2 decimal places (5 digits instead of 3) when scanning the frequency..

hi polluxti

sorry can give me more details about how u manage to get the H2 channel. Cos I have tried many times but still not able to get it yet.

[jerjan]

hi polluxti

sorry can give me more details about how u manage to get the H2 channel. Cos I have tried many times but still not able to get it yet.

READ
Read back few pages .........

[neb04]

Hey Puddie,

Many thanks for your manual link. BTW your PM box full, cannot accept anymore.

[Puddie]

Hi all,

Received a few PMs regarding the manual, with some peeps being unable to unrar the file.

Anywhere, here it is. Hope it helps you guys.

https://anonfiles.com/file/9776f9d9880a98e7a067915a78997c22

[skeckrow]

I try it but i cant get the signal at all. I try all the freq for bpl but to no avail.

[Pathfinders]

For those who have successfully scanned and able to watch BPL, can you still watch it today? I realised my channels for BPL are now showing blank screens. I tried rescanning but still can't find back the BPL.

How are the rest of yous?

Sent from my GT-N7105 using Tapatalk 4

[Pokemon999]

Power off and unplug. Wait for 5 to 10 mins.

[Puddie]

For those who have successfully scanned and able to watch BPL, can you still watch it today? I realised my channels for BPL are now showing blank screens. I tried rescanning but still can't find back the BPL.

How are the rest of yous?

Sent from my GT-N7105 using Tapatalk 4

101 - 103 is fine. 104 nothing. Didn't bother trying the rest..

[moviesg]

Ia running fine for dm800se

Sent from my GT-I9305 using Tapatalk 2

[Polluxti]

hi polluxti

sorry can give me more details about how u manage to get the H2 channel. Cos I have tried many times but still not able to get it yet.

Did you update the fw? I did rescan after flashing firmware. Be sure to set symbol to 6090 and rescan also.. after that it's in the 900+ of the channel.. not the default 402..

[Hyperactive]

just receive a letter from sh, some of our sh hd box need to change before 24th OCT. N3 is coming, for those who just bought a new box gd luck.

[SGDVB]

just receive a letter from sh, some of our sh hd box need to change before 24th OCT. N3 is coming, for those who just bought a new box gd luck.

You using 3800c?


*****************************************
Sent from my iPhone using Tapatalk

[Hyperactive]

Yeah ! I'm using 3800c. Last nite my MVD 600c white box suddenly can't watch, only can watch ch5, 8, chU. Did u guys got this prob ?

[shidevil]

Yeah ! I'm using 3800c. Last nite my MVD 600c white box suddenly can't watch, only can watch ch5, 8, chU. Did u guys got this prob ?

Totally can't? Rescan??


Sent from my iPhone using Tapatalk

[Hyperactive]

Try full scan liao still can't. Later go back try again see can or not. ***128532;

[Pathfinders]

For those who have successfully scanned and able to watch BPL, can you still watch it today? I realised my channels for BPL are now showing blank screens. I tried rescanning but still can't find back the BPL.

How are the rest of yous?

Sent from my GT-N7105 using Tapatalk 4

Just an update, I just rescanned and found the channels again.

Sent from my GT-N7105 using Tapatalk 4

[Hyperactive]

After off and on the power supply, everything back to normal ***128521;. Heng !

[Polluxti]

i notice this set sometimes need a power reboot, meaning turning off the power supply, waita few seconds and turn on again.
i experience twice after some 1 week on standby (meaning powered but set not turn on:red led) never turn my box will show black and cannot descamble or totally cannot even turn on with remote..
but after turning off the power adapter, wait a few sec, and reboot then all is well..


Sent from my Mobile Command Centre on Tapatalk.

[trent87]

Just try updating my FYHD MHD HD600-C now stuck at boot up screen =(

[balis]

Hi all am a newbie .... im using fy800hdc iv ... currently ive got a pixilated screen on bpl channel .... what minor/major adjustments I should make? .... many tks

[NT-Social]

Hi all am a newbie .... im using fy800hdc iv ... currently ive got a pixilated screen on bpl channel .... what minor/major adjustments I should make? .... many tks

Hi balis, I also have a similar problem.. It is supposedly a signal problem and I wanted to install a signal booster but my home layout does not allow one.. However, I have noticed when u initially turn on the box.. Alot of pixelation occurs.. Leave it on for around 5 - 10 mins and everything will be ok.. That's how it is for me so far

[akuterrer]

Closing post.

[xomac]

Hi Guys,

I just bought this FYHD MVD600-C. I am unable to get any channels when scanning. It does scan the channels and lastly it shows saving config but right after tht, it will go back to the channel scan page. By right, it should straight away go to Channel 1. Any idea how to resolve this issue?


http://www.youtube.com/watch?v=pLi6dr-l2jo&feature=youtu.be

0 channels detected, which is probably why it went back to the scan page.

[akuterrer]

Closing post.

[shidevil]

When you use another box, did you notice the quality bar increase?

Also can the set watch FTA channels??

Maybe due to the tuner not working..

[akuterrer]

Closing post.

[chinwm]

thanks tammy tan!! it worked!!


I thought it would be good to share here how I manage to get all the new channels here since I've got PM asking me on how I do it.
1) Make sure you have the latest FW ( file should be FY.AP), not those on pg 7 here.
2) select Menu/ Channel search / Manual search.
3) At Frequency(MHZ) select 128 / 136 / 149 (do one frequency at a time) and Symbol at 6090
4) Before you press ok to search,WAIT for the Quality bar below for signal strength first. If no signal shown, pressing ok will not get you any new channel. (It may take around 5-30 sec before you see the Quality bar showing signal and it may take a few try before you get it.)


Channel 101 to 106 will be shown and 107/108 will be shown as unknownChl
Remember all the new channels will be situated at the back and will not be in correct order. I just save them as FAV for easy access. Hope it helps.

[shidevil]

Hi,

If I am not wrong, the quality bar increases with the other set top box. What is FTA channels?
If the tuner is not working, any way to repair this locally?

FTA channels are free to air channels. like channel 5,8,U, CNA.

If you cant even get FTA channels, it means ur tuner is spoil? try another cable??

U can try go sim lim tower.

[Pokemon999]

I tested on another box of the same model however and it was able to get all channels. Only this box unable to detect the channels.

Did you test at the same box at the same house or at another house?

[akuterrer]

thanks tammy tan!! it worked!!


FTA channels are free to air channels. like channel 5,8,U, CNA.

If you cant even get FTA channels, it means ur tuner is spoil? try another cable??

U can try go sim lim tower.

Oh ic. No, unable to get any channels at all. Not even the FTA channels. I've tried using another cable as well but still same. Any ideas where to get the tuner repaired if indeed it is spoilt?

[akuterrer]

Closing post.

[shidevil]

Oh ic. No, unable to get any channels at all. Not even the FTA channels. I've tried using another cable as well but still same. Any ideas where to get the tuner repaired if indeed it is spoilt?

Tuner spoil then.. Go bring back to ur seller. Repair of tuner I don't think is worth. U can try sim lim tower level 1. Walk around to ask?


Sent from my iPhone using Tapatalk

[marcoin]

Anyone can provide firmware latest for fy hd800c xiii? Need it to rescan new channels. PM pls.

[ong26bj]

I am getting pixelated and unstable signal on GINX HD at freq 482MHz, sym 6875.

Anyone knows of any alternative freq and sym? Thanks in advance.

[th3keeper]

I have just found out that it is not necessary to upgrade firmware for our 1st gen FYHD as I have just help a friend to search for all new channels using old firmware.

Hi Tammy mind teaching how to get the new channels? I am using the 3rd gen but I have a friend using 1st gen and does not wanna risk updating the fw. When you mean new channels does it include the MIO channels? TIA.

He is using FYHD HDC-800. Front panel got buttons one. White set

[th3keeper]

thanks tammy tan!! it worked!!

Hi Chinwm, saw from your previous post that after you update FW your set could not get any channels? When you used tammytan's method it was solved? Or you downgraded the fw? Please help as I am also using the first version of FYHD. I am on white thou not sure if yours is black or white.

[SGDVB]

Oh ic. No, unable to get any channels at all. Not even the FTA channels. I've tried using another cable as well but still same. Any ideas where to get the tuner repaired if indeed it is spoilt?

You can try any st*rhub customer service centre too. They know best.


*****************************************
Sent from my iPhone using Tapatalk

[shidevil]

Hi Tammy mind teaching how to get the new channels? I am using the 3rd gen but I have a friend using 1st gen and does not wanna risk updating the fw. When you mean new channels does it include the MIO channels? TIA.

He is using FYHD HDC-800. Front panel got buttons one. White set

Just do a manual scan. If not delete ur Channel list and auto scan again. Simple right?


Sent from my iPhone using Tapatalk

[th3keeper]

Just do a manual scan. If not delete ur Channel list and auto scan again. Simple right?


Sent from my iPhone using Tapatalk

Sorry but how do I delete my channel list? I tried doing this as well.

[shidevil]

Sorry but how do I delete my channel list? I tried doing this as well.

Have u tried to explore ur setting page on the box??


Sent from my iPhone using Tapatalk

[th3keeper]

Have u tried to explore ur setting page on the box??


Sent from my iPhone using Tapatalk

Yup, I might have missed out some. If possible please guide me :top:

[shidevil]

Yup, I might have missed out some. If possible please guide me :top:

If you have explore. U wouldn't have miss out any. It's at the channel list setting. Just go and look at it.


Sent from my iPhone using Tapatalk

[th3keeper]

If you have explore. U wouldn't have miss out any. It's at the channel list setting. Just go and look at it.


Sent from my iPhone using Tapatalk

Ok. Shall take a look there then.

[Andykoh198]

My post got deleted =(

[PremierD]

Why ? .....................

[Andykoh198]

Maybe posted something mods dun think is suitable.. was replying to a bro gettinf poor reception. Getting black rf cable and shorter ones will helo. Also was asking about n3 technology. If it requires card when it " officially " launches or a fw upgrade would help?

[rowdyruffbrick]

hey guys anyone can help? my FYHD-800cii quality seems to have dropped after i changed some frequency for the BPL. any idea how to fix this? images used to be sharper

[novaol]

Just roll back your steps and change back the settings which you had made, else the possible way was to reset back to defaults and starts all over again. Hope that helps.


hey guys anyone can help? my FYHD-800cii quality seems to have dropped after i changed some frequency for the BPL. any idea how to fix this? images used to be sharper

[novaol]

I noticed that for DreamBox there is a team who setup all the channels nicely to it's group. Does FY team has a similar way with updates so that I can update the box for a friend who uses FY800HD! Appreciate your help on this. Cheers

[Andykoh198]

hey guys anyone can help? my FYHD-800cii quality seems to have dropped after i changed some frequency for the BPL. any idea how to fix this? images used to be sharper


Try to use the black antenna cable. Gives u better signal. White cable is rubbish

[pirsquared8]

I noticed that for DreamBox there is a team who setup all the channels nicely to it's group. Does FY team has a similar way with updates so that I can update the box for a friend who uses FY800HD! Appreciate your help on this. Cheers

FY boxes cannot be compared to DM clones as the later OS is a proper Linux OS with greater flexibility. So for the case of yr friend, i would suggest that you

1. delete all the stored channels
2. then do a NIT channel search (of course you need to have set the various 6090 6875 frequency range etc.. to automatically search)

quess you do not need any channel sorting as after the NIT search, you can use the 3 fiqure channel selection that is similar to the Green fat Pipe guys.

[jenovauh]

Hi guys im new here and read many post regarding FY Hd however I still unable to receive epl chanels. I waited for 30secs to 5min still no signal. I believe I got all other chanels except EPL.

My model as follows:
NAME:HDC800-2
Model: HD-FTA-AVS+DVB-C
SW Version: HDC800 V1.4 TNDT
FW Version: HDC800 V2.0

SW VersionTime: 2012-8-3

Please advice. Do I need to update the software and firmware? I cant seems to update the firmware using FY. At and .Bin help pls.

When I select .bin to ref lash my firmware, the screen flickers and back to channel 101. Unable to proceed to updating screen.

Hi Menifestozz, your firmware version is same as mine, I just flash mine from this url (http://www.mediafire.com/download/g90si93drgoj2d7/05082013-White-FYHD-MHD-usb_upgrade_app.bin) and it worked. So dont loose hope and good luck.

219699219700219701

[khairulalonso]

Anyone can help? my box can't detect fy.ap
i accidentally updated my FYHD HDC800
anyways i can unbrick or downgrade my firmware? pls help! TQ
it can't even detect any channels.

[justbear]

Delete
10chzrs

[croc]

222539

any firmware update for this machine?

some how manage to power up after 2 mths shut down...

just want to use till d day cum

[plasterer]

You could try the URL in jenovauhs post 3 above this one He seems to have had a sim prob and got his going with the firmware from that link,
Nothing to loose really .................Paul

[croc]

You could try the URL in jenovauhs post 3 above this one He seems to have had a sim prob and got his going with the firmware from that link,
Nothing to loose really .................Paul
where is the link?

[nicole2014]

I thought it would be good to share here how I manage to get all the new channels here since I've got PM asking me on how I do it.
1) Make sure you have the latest FW ( file should be FY.AP), not those on pg 7 here.
2) select Menu/ Channel search / Manual search.
3) At Frequency(MHZ) select 128 / 136 / 149 (tel:128 / 136 / 149) (do one frequency at a time) and Symbol at 6090
4) Before you press ok to search,WAIT for the Quality bar below for signal strength first. If no signal shown, pressing ok will not get you any new channel. (It may take around 5-30 sec before you see the Quality bar showing signal and it may take a few try before you get it.)


Channel 101 to 106 will be shown and 107/108 will be shown as unknownChl
Remember all the new channels will be situated at the back and will not be in correct order. I just save them as FAV for easy access. Hope it helps.



Referring to your instructions above, does it work for HDC 888e?

[qqfishy]

I really need some help here.... I have FYHD 800c-ii and FYHD 800c . both boxes, does anyone know how to search the channels so that I can watch the BPL ? I tried searching for the frequency to search but to no avail, I cant find any information. as for the firmware.. I can only find the newer versions of the box.. anyone know where can I find the firmwares for the 2 versions of boxes I have ? or do anyone know how to watch the BPL using this 2 boxes.. please guide me along.. thanks a lot

[pirsquared8]

I really need some help here.... I have FYHD 800c-ii and FYHD 800c . both boxes, does anyone know how to search the channels so that I can watch the BPL ? I tried searching for the frequency to search but to no avail, I cant find any information. as for the firmware.. I can only find the newer versions of the box.. anyone know where can I find the firmwares for the 2 versions of boxes I have ? or do anyone know how to watch the BPL using this 2 boxes.. please guide me along.. thanks a lot

If you read up the past threads on that is going on the past month or so, there were others in your predicament.

perhaps yr answer is in this post http://www.digital-kaos.co.uk/forums/f34/b-prem-lea-channels-fy-hd-800c-iii-361944/

[qqfishy]

theres a big difference between FYHD 800c -iii and ii I guess.... if its about upgrading the firmware, I am told that I should not try to upgrade a different model firmware

[pirsquared8]

theres a big difference between FYHD 800c -iii and ii I guess.... if its about upgrading the firmware, I am told that I should not try to upgrade a different model firmware

ok dun try f/w upgrade. have u tried the NIT search for channels? channels may not be in running order. this is assuming your sugnal to yr home is good i.e >85%

[qqfishy]

btw I tried using the information given... but same as the others... theres no programme found

[qqfishy]

yea I tried the NIT search , but do u have the frequency, the kbs and the qam information for me to search ? my signal is 73% ... I used to be able to see the MIO channels but now I cant search for them anymore

[DBTraitor]

Bro, you seems very confident that your box can watch MIO
Then your box is the best super box because I have never heard of any box able to get MIO content yet

[Rockstar84]

I have got the problem of not being able to boot up as well, and the thing is , there is just a black screen when the box is turned on, the box is stuck at boot.

I read through this thread, and tried updating the s/w, but without no display popping up, seems no use.

Kindly enlighten me, if a hardware change is required, which are the components to replace.
*If it has already been discussed, kindly excuse my oversight, do guide me along.

251954251956

[louiew]

I have got the problem of not being able to boot up as well, and the thing is , there is just a black screen when the box is turned on, the box is stuck at boot.

I read through this thread, and tried updating the s/w, but without no display popping up, seems no use.

Kindly enlighten me, if a hardware change is required, which are the components to replace.
*If it has already been discussed, kindly excuse my oversight, do guide me along.

251954251956

Hi, same for me here! I got the same issue after i do a update? i think from this link Lastest Firmware for MVHD/FYHD/TNHD white and black box (http://www.singapore-dreambox.com/lastest-firmware-for-mvhd-fyhd-tnhd-white-and-black-box/). The screen just remained blank. Is there anyway i can fix this? I am not able to watch any HD Chl =( My model is HDC-800-e btw. Any kind soul know how to fix this problem? Thanks in advance.

[jack_diniro]

Hi All Bros~!
Is there possibility for FYHD to scan for VOD channels? Sometimes they show some nice Hokkien Channels. LOL~

May I know is it possible? What Freq is that?

Thanks!

[dragon head]

get the components and DIY on the replacement.

[SGDVB]

Hi All Bros~!
Is there possibility for FYHD to scan for VOD channels? Sometimes they show some nice Hokkien Channels. LOL~

May I know is it possible? What Freq is that?

Thanks!

Not sure about this crappy FY box but vid channels does work on dreambox but beyond the selection. You see what the official subscriber (around your area) see.


Sent from my iPhone using Tapatalk