Log in

View Full Version : Need advice on setting up lmb t o 3 satellites



andriusv
10th February, 2013, 10:39 PM
Hi can someone tell me if I can get universal lmb holder which can be set to Astra 4.8 Hotbird 13 and Astra2 28.2. I am using TD110 dish.any advice is much appreciated.Thanks

ramjet
10th February, 2013, 11:00 PM
Hi can someone tell me if I can get universal lmb holder which can be set to Astra 4.8 Hotbird 13 and Astra2 28.2. I am using TD110 dish.any advice is much appreciated.Thanks

you can buy the triax 4 lnb holder for your td110 dish, and move the individual lnb holders along the rack to where you need them to be

add an lnb into each holder, and use a 4 way diseqc switch to switch between them

andriusv
10th February, 2013, 11:32 PM
Thanks. I am looking on eBay they all are from 3 to 20 degrees. Do I still can get on astra 28.2e

ramjet
10th February, 2013, 11:45 PM
Thanks. I am looking on eBay they all are from 3 to 20 degrees. Do I still can get on astra 28.2e

it may do , or may not , the 5e is going to be a struggle but thats your fault for wanting such a wide spread , a motor would be a better bet

digicon
11th February, 2013, 12:10 PM
You will get the 4.8? east European beam as this can be picked up on a standard 43cm dish but forget the Nordic beam on that kind of spread as ramjet so rightly states.

you would have to make 13? east your centre with 4.8? & 28.2? as your offsets.