HELP TO PROGRAM KEYLESS KEY FOR NISSAN VERSA 2008 US MODEL

[elmaalouf]

hello friends
pls i need help to program a key less for nissan versa 2008 i am usually programy nissan keyless using t300 or x-100 with success i already done many altima 2008-2009 and fx2009 but for those cars without start button i am not able to do i can program the key in the ignition but not the key less so help pls
thanks in advance

[ray-ray]

Easy my friend, sit in car and lock yourself in with the door lock switch. Next stick the key in the ignition "in & out" 6 to 8 time you will see the hazard light flash on the dash. Stick key in the ignition & turn to Acc >> lock or unlock using to door switch. Now press the remote button and keep your eyes on the dash should flash if it took the remote .

[elmaalouf]

Thanks for ur Reply I am asking about about the smart key not the remote is it the same way?

[immomaniac]

Ray ray he means twist proxy system keys

[indienick]

in USA you must unlock the steering wheel first...

and if have wrong BCM 3 times it will lock you out for a while.

[elmaalouf]

So what ihave to do?

[elmaalouf]

i unlocked the steering lick and do all and i try to program the key the car start but after cutting off for some minutes it cant start again

[indienick]

If you attempted to program 3 times before unlocking steering wheel, the BCM will lock. Must sit with car on for about one hour I think. THen start the procedure from beginning.

Make sure you have the correct PIN before you begin....this car uses may use "old" or "new" PIN...need to try both.

[sideshow]

ive done some Nissan elgrands which are big vans and they have proximity and once I used a sbb but it didn't have elgrand on menu so I used Nissan marano but that only works sometimes , the other time I used x100 to punch in correct bcm code and then it unlocked the steering lock which allowed me to program the key which at same time programmed the proximity if it was close to key, and one other time a customer supplied chinese clone key and it worked for afew hours but the next day he went to start car and it would not start so I reprogrammed and same thing happened the next day, so I bought a genuine key and it has not failed so I always try to use genuine keys

[elmaalouf]

i was trying the pin code 5523 and it wasnt not giving me wrong code any way attached the bcm photo can i get pls the pin code old and new for this bcm to try them all and reply
thanks in advance

[siyadk]

what......5523.. no way, who told you to try 5523, that is for old NATS system( esp if the key is 4d60). we are talking about the intelligent key here

Try 8869(this is old pin)

[elmaalouf]

The car is 2008 can it be the new pin?

[siyadk]

i dont know...u need to try

[elmaalouf]

ok will try tomorrow and reply thanks a lot and any idea if its the new pin how to get it?
thanks again

[immomaniac]

The best place to get new pin is DK itself.....
Post ur bcm code (cbad7) and ask for new pin

[sideshow]

2693 is new code hope it helps

[sideshow]

2693 is new code hope it helps I bought Nissan pin code software few weeks ago only 150 bucks so not to bad but now thinking of getting ad600 as it does Nissan ford and Hyundai kia

[elmaalouf]

can u pls share a link for it ?

[immomaniac]

Ad600 from sigmabit. eu

Or
Icc-immocode

Google it u will see but beware its expensive

[sideshow]

Nissan Pin Code Calculator-Nissan Code Calculator-Online Shopping (http://www.xcar360.com/nissan-pin-code-caculator.html). There is also ford one which I might buy. Cheap investment and make money back quickly

[immomaniac]

Did u start the car yet?? Or need futher help? Ask if u need

[elmaalouf]

Not yet i will try today and reply

[super jumbe]

hello friends
pls i need help to program a key less for nissan versa 2008 i am usually programy nissan keyless using t300 or x-100 with success i already done many altima 2008-2009 and fx2009 but for those cars without start button i am not able to do i can program the key in the ignition but not the key less so help pls
thanks in advance

Toyota Smart Keymaker by OBD youtube:
Q00623-Toyota Smart Keymaker OBD for 4C and 4D Chip - YouTube (http://www.youtube.com/watch?v=RpOwCiKZtRg)

[siyadk]

Toyota Smart Keymaker by OBD youtube:
Q00623-Toyota Smart Keymaker OBD for 4C and 4D Chip - YouTube (http://www.youtube.com/watch?v=RpOwCiKZtRg)


this is NISSAN!!!!

[912secured]

My icc got stolen went back to pulling from flashs must of thought memory card.

[immomaniac]

did u solve it... i did this same car today.. i might be able to help you.contact via pm..send ur skype id

[elmaalouf]

Hello friend I am still not able to do it the car start for 3 or 4 times but proxy key can not be programed. I am not sure what is wrong I will contact u via pm
Thanks

[912secured]

read the eeprom from bcm if can not get to work from bcm. Had about 10 that did not match with old calc.

[immomaniac]

but Jim (SIDE SHOW) HAS GIVEN HIM NEW BCM , SO WHY TAKE TROUBLE PULLLING THE BCM AND READ IT