iveco daily- speed pulse pin out needed

[malc3469]

Hi guys some one have the number of pin for speed pulse in the dash?.
Thanks.
BR.
:party:

[LoRaier]

Does this cluster has two 20 pin connectors, one black and one blue? (I cannot see it in the pics)

If affirmative, speed pulse is in the pin 1 of blue connector

[malc3469]

Hi Loraier the conectors are green (32) and blue (32), thanks anyway.

[malc3469]

anyone;? program name for FIAT / IVECO schemes, some data however small?

[TULGEYWOODMAN]

Hi guys some one have the number of pin for speed pulse in the dash?.
Thanks.
BR.
:party:
1996
look under the wiper motor in the engine bay...orange wire 5517.
no.30 green is permanent live
red is not live when starting engine

1997
driver side door post over the fuse box is a black box. The signal is at pin 1 of the white 8 pin connector. The cable has the number 5517The cable colour can change. Please look for the cable number 5517.

2000
.Daily 2000 including model 35E11

At the instrument cluster there are four connectors, the distance signal can be found on orange wire number 5517 in the top left connector. The RPM signal can be found in the same connector on wire number 5512

The cable colour can change. Please look for the cable number 5517.

[Meat-Head]

Tacgigraph and / or edc16

[malc3469]

Hi tulgeywoodman, i can test the sensor and are ok, i cant test the dash, the vehicle are many km from me so i cant se the electricpack,
The bus have only 48 000 km (new), the company install a GPS with BUS CAN monitoring for see the speed in real time, so i think the tecnician how make the baypassing of information cut some "extra wire".
anyway your information is good; thanks for sharing.
Hi Meat- head I think tachograph yes, ECU i dont now.
Thanks.

[Ocin]

Someone have pin out for this dash ?

Thanks

[Meat-Head]

Thought all the wires are green

[waldi1979]

2 connectors - speed sensor signal pin 22 of Blue connector
4 connectors - pin 1 of Blue larger connector

[Meat-Head]

Bugger forgot about this, I got some photos of tachgograph in one of these but I MUST edit the serial numbers, due to it been a stolen vechile - my imganary friend Vic see one with the keys in, so he took off in it.

then he rather kindly pulled the tachograph out and photographed it but the dense fkuc left the serial numbers on it.


OFF TOPIC:-

How do you edit photo on an iShit?

[88diablo]

Top right hand corner of photo :joyous:

[DaveAbernet]

Does this cluster has two 20 pin connectors, one black and one blue? (I cannot see it in the pics)

If affirmative, speed pulse is in the pin 1 of blue connector

Sorry to resurrect this thread from so long ago - Can you confirm for the type you describe, with 2 20-pin connectors, is Blue Pin 1 the speed pulse into the cluster? I'm looking to identify the speed pulse OUT from the cluster to the ECU / Speed limiter. I know that when I pull that 20-pin blue plug, the speedo stops working, and so does the limiter. :-)

[Meat-Head]

Welcome to dk the worlds best website

no idea on your question but as a rule the in/out will be next to each other, check with olliscope