Smart 1000

[iw8rqm]

Hello everyone, I am seeking your help in relation to a 2007 Smart 1000:
I made the change in the Km in DASH and BSI, reassembled everything and the car has the following problems:
The dash lights remain lit on without key inserted
The machine does not start
the display panel is dead
In diagnosis: communication problem can


Does anyone have any idea? :grey:
Thanks in advance

[dashradio]

Why did you start a new topic when you already have the same topic running ?

http://www.digital-kaos.co.uk/forums/f174/smart-1000-a-424083/

[jjrp255630]

car need to work without dash, try check BSI, check solder points if you take mcu off

regards

[audiomeca]

not not

this car not start without dash fitted

dashs is part can gateway

regards

[Gizbern]

Post dumps DASH and BSI

[iw8rqm]

Why did you start a new topic when you already have the same topic running ?

http://www.digital-kaos.co.uk/forums/f174/smart-1000-a-424083/


Oppsss...:stoned:

[iw8rqm]

I saw your previous time ...

[iw8rqm]

Solder point ok, read and write ok, mileage and vin ok... :-(

[iw8rqm]

Post dumps DASH and BSI
I try post dumps , thanks...

[iw8rqm]

Here is the dump of the dash, in fact, something was missing ...
I have corrected, can someone check ..?

[davecooper47]

Dash would not stop the car from starting. Where is the dump from BSI?

[Gizbern]

I tested, Dump is not ok, Car not started

[iw8rqm]

The readings in kilometers was correct, but lacked the Vin in two other areas ...

[iw8rqm]

This is the original file. Can anyone help me fix this?

[audiomeca]

Hello, your file check

[iw8rqm]

Hello, your file check
I try tomorrow and let you know.


Thank you!

[iw8rqm]

The dash is dad... :-(

[audiomeca]

Hello

the dash run ok with the original file that you have upload?

BR

[iw8rqm]

Hello

the dash run ok with the original file that you have upload?

BR

The display does not turn on with the original file...
Here BSI and DASH original, in attachment...

Thanks

264485

264486

[audiomeca]

but if with original nor trun on your file is corrupt when read or pcb damage in the dash

[iw8rqm]

[QUOTE = Audiomeca; 2317678] ma se con l'originale n? Trun sul vostro file ? danneggiato durante la lettura o pcb danni nel cruscotto [/ QUOTE]


In realt?, il dump del cruscotto ? danneggiato, parti mancanti.
Ho provato a ripristinarlo ma niente ... :-(

[audiomeca]

hello try to write this file if is ok I prepare to you a right file for your car, have DAS XENTRY ?

http://www.digital-kaos.co.uk/forums/attachments/f174/190482d1365095681-dash-451-smart-dash-451.rar

[audiomeca]

Hello try this new file. vin corrected for your car

identical pass

regards

[iw8rqm]

Hello try this new file. vin corrected for your car

identical pass

regards


Nothing to do, nothing changes ...
Ideas ..? :-(

[zoyzoyni]

if you perform successfully scn,maybe is your only solusion for save money and time.other way is used bsi.

[audiomeca]

if you perform successfully scn,maybe is your only solusion for save money and time.other way is used bsi.

Hello, SCN not solve one dash that not boot!!! this is a dash problem, if you change the dash for one used dash from other car with other SCN, the dash boot and the car start!!!

[audiomeca]

Nothing to do, nothing changes ...
Ideas ..? :-(

Not more ideas, you need other dash (new or used) and try. I think that your dash is dead!!!

Regards

[iw8rqm]

SCN..?
I need other dash...
Question: But the low voltage battery, may have caused the problem..?