Log in

View Full Version : Mercedes Atego key programming.


luiscarlo
20th May, 2015, 01:15 PM
Please help i have read 93C86 and generated a key and recorded in a T5 with Zed-Bull, but does not start the truck, immo light flashes.
Can someone help me to see if this good or generate another good key.

Thanks in advance.


314325
KILL_THE_IMMO
20th May, 2015, 02:26 PM
USE A VIRGIN CHIP
luiscarlo
20th May, 2015, 02:48 PM
hello KILL_THE_IMMO.
I used a virgin and recorded with T5, Zed-Bull.
but it does not work.
The chip writes me well FF81A48026106F41
but it does not work.
Anyone know what might be happening,

a greeting.
kemaster
20th May, 2015, 03:15 PM
Could be low quality transponder. Did you try another one? Take it out from the key and put it near the antenna coil to test
luiscarlo
20th May, 2015, 03:21 PM
I tried it in the Zed-Bull, and reads it well, and I've also tried with another chip, and does not start and immo light flashes.
The truck was lost all keys, halgien know how it started.

a greeting.
kemaster
20th May, 2015, 04:08 PM
Sorry, may be missunderstanding. I meaned to take it out of key and put it near the truck antenna(not zed bull)
luiscarlo
20th May, 2015, 04:17 PM
Sorry, may be missunderstanding. I meaned to take it out of key and put it near the truck antenna(not zed bull)

hello
I put it in the zed bull and the truck.
The key've made with 93C86 eeprom of ecu.

And I made the chip with zed bull, but does not start and if not, if someone can prove it.
Bllinda
20th May, 2015, 08:47 PM
The key is correct.
T5 ceramic or glass?

there is a second key. PM

hello
I put it in the zed bull and the truck.
The key've made with 93C86 eeprom of ecu.

And I made the chip with zed bull, but does not start and if not, if someone can prove it.
luiscarlo
20th May, 2015, 10:01 PM
hello. Bllinda (http://www.digital-kaos.co.uk/forums/member.php/162273-Bllinda)

T5 ceramic???
Bllinda
21st May, 2015, 08:34 AM
Yes, you are right.
hello. Bllinda (http://www.digital-kaos.co.uk/forums/member.php/162273-Bllinda)

T5 ceramic???

Thanks : 9
abrhem
21st May, 2015, 08:57 AM
hi
t5 use gambit or tango
luiscarlo
21st May, 2015, 02:45 PM
Hello. abrhem
zed bull's bad record T5 ???
ovitanov
21st May, 2015, 08:26 PM
On the PLD board are two 93c86, one with key data, second for other data recording. Are you sure you got right eeprom with key data?
luiscarlo
21st May, 2015, 09:45 PM
hello ovitanov.
It is this that I have checked,???:hypnotysed:

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=314562&stc=1
Bllinda
22nd May, 2015, 08:40 AM
It can not be that all is well and the car does not start.
Look for another good e.cu.
with any failure, the car?
what block numesris (A ....)?