PDA

View Full Version : 1997 MERCEDES C180 DAS 2 CODING...



SirshenG
21st July, 2015, 04:25 PM
Good day members.....i have a 1997 Mercedes C180 that has been towed to my workshop which has a stolen immo box, original ecu and original key...I have bought a immo box from scrap yard , I need to align immo box(OD53J) to key(93c46) and has a 24c04Vdo ecu. The car has a key reader around ignition with green and red lights at rear view mirror system. Could someone please realign attached dumps. Many thanks in advance .

Bllinda
22nd July, 2015, 07:21 AM
Keys ....

SirshenG
22nd July, 2015, 08:03 AM
Thanks again Bllinda ....if I write to the 93c46 eeprom on the key will it start the vehicle as the immo box is not from this car? because I do not have star if it needs to be aligned.....Thanks in advance

SirshenG
22nd July, 2015, 08:40 AM
Correction its a x24c02 eeprom on the vdo ecu

bram380
22nd July, 2015, 09:09 AM
Thanks again Bllinda ....if I write to the 93c46 eeprom on the key will it start the vehicle as the immo box is not from this car? because I do not have star if it needs to be aligned.....Thanks in advance
you need align immo to ecu

SirshenG
22nd July, 2015, 12:04 PM
Thanks bram Would u have a matched ecu, immo box n key dump for this system?

bram380
22nd July, 2015, 01:23 PM
Read eprom ecu,
i think many DK member will help you.

SirshenG
22nd July, 2015, 04:45 PM
The Vdo ecu part number is 022 545 87 32 ...eeprom x24c02 file attached....thanks in advance

leandroks
5th August, 2015, 10:08 PM
325443
Hi there, i ve got a mercedes w210 e320 wich got the Immo 0d62j corrupted, so i got a immo box from junk and i need to match it to my ECU.
Could any one give me a hand on that???
Thanks in advance


Leo

bram380
6th August, 2015, 01:16 AM
try this dump:

leandroks
6th August, 2015, 12:47 PM
Need to adapt with star:::???

bram380
6th August, 2015, 02:27 PM
Need to adapt with star:::???
yes, need star das

leandroks
6th August, 2015, 04:13 PM
I ve got another mercedes complete dumps set.
93c46 from ir key
0d53j from immo box
24c02 from ecu
If i write those dumps is it going to work??
On the ecu there is another eeprom 27c210 is necessary to write it as well???

Thanks a lot..

Leo