Citroen Relay 2010 remote not working after programming why?

[rm23]

Hi

I have bought remote of 3dgroup remote number is Fir6c made by Istanbul Anathar from ieakeystore.com, I have read bsi eeprom with Avdi precoded key with file then coded by obd2. Car starts but no remote? Can someone tell why? did someone used this type of key on these cars and remote was ok? If you check remote on tester remote is fine. Central locking working fine when you use buttons inside the car or lock car manualy. Thank You for any advice !

[Atex31]

Not had any issues with those keys apart from the price.


Never tried to make a Fiat remote key with AVDI though.

[adamgr]

if this is a id48 type key then You need to program the remote with another tool
HTH Adam

on a side note does the key fit into the door lock with the blade they supplied

[rm23]

My is id46 type, bsi number is 1364523080. Yes my key works ok on the door lock and in ignition.

[obdsystems]

Simple -
AVDI doesn't support remotes. You need TMPro2 or ZedFull.

[autochei]

and corect remote it s magnetti marelli like this http://www.autoremotecontrols.com/auto-remote-controls?s=&sSingle=&sDecimal=&fMarka=13&prcid=&Sr=&Gr=&St=

[Atex31]

and corect remote it s magnetti marelli like this http://www.autoremotecontrols.com/auto-remote-controls?s=&sSingle=&sDecimal=&fMarka=13&prcid=&Sr=&Gr=&St=


The remote part No he used was the correct Marelli type.

[workdamnyou]

H.............

[rm23]

job done today with tmpro2 and module 112 and avdi to read bsi via obd2, remote operate now !! ;)

[autochei]

job done today with tmpro2 and module 112 and avdi to read bsi via obd2, remote operate now !! ;)

can u put ur dump here?