View Full Version : Renault Uch Problem
bearheroes
18th November, 2015, 05:50 PM
Hi
Does anyone know which relays are for windows?
The car Clio 2001
Thank you very much.
marcon242
18th November, 2015, 09:18 PM
There is no relay on uch for window , the relay is on electric window motor.
bearheroes
18th November, 2015, 10:21 PM
So if windows don't go up or down is not problem of uch?
If not what else could it be?
tas_daz
18th November, 2015, 10:22 PM
the window switch have problem.take a schematic on autodata and check
tas_daz
18th November, 2015, 10:24 PM
the window switch have problem.take a schematic on autodata and check
but if you have car test on car with power cable tester on back from relay
Bllinda
18th November, 2015, 11:47 PM
I think that will help :)
jokas
19th November, 2015, 09:44 AM
the window switch have problem
mikajna
19th November, 2015, 11:58 AM
Does windows dont work at all, or they cutting?
bearheroes
19th November, 2015, 03:29 PM
don't work at all.
mikajna
19th November, 2015, 10:53 PM
I had problem on some clio mk2 windows are cutting, work on moment, than stop...etc
Swaping UCH solve my problems, that was Sagem N1, I put Sgem N2...just to know you can use higher number on lower, but you cant lower on higher...
N3 can replace N2 and N1, N2 can replace N1, and N1 is only for N1, and just swap eeproms desolder his eeprom and solder back to donor UCH.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.