PU2294B HELPPPPP

[ubistvo]

OK
I have clarion PU 2294 with 93c46 rotated
I read eeprom and i found code and reset counter
But every time i start the radio say "CODE IN" and after that only show this "----" and not alowe me to
enter the code
I try many diferent dumps but every time is ----
What to do?
Does anyone know???
THANKS

[shooting]

OK
I have clarion PU 2294 with 93c46 rotated
I read eeprom and i found code and reset counter
But every time i start the radio say "CODE IN" and after that only show this "----" and not alowe me to
enter the code
I try many diferent dumps but every time is ----
What to do?
Does anyone know???
THANKS

Will be fault in Button panel ;)

wbr

[ubistvo]

aha ok i will see for that

No all buttons work perfectly :(

Is it posibile to work without code??

[shooting]

aha ok i will see for that

No all buttons work perfectly :(

Is it posibile to work without code??
Post your dump and I'll check it for you...

wbr

[ubistvo]

Here try my friend

[shooting]

Here try my friend

And you tried 3141 ?

wbr

[RadioChiP]

flex cable ok?
@shooting
first read post please

[shooting]

Here try my friend

Dump OK, must be front panel at fault..., remove front panel and examine connections..

wbr

(I've made an alteration to your dump to try if front panel is ok)

[ubistvo]

OK
I tested again front panel and all ok
I will try your dump now

shooting Not working
Still the same fuc... sh..t

[shooting]

OK
I tested again front panel and all ok
I will try your dump now

shooting Not working
Still the same fuc... sh..t

Have you got another front panel to try?

wbr

[ubistvo]

No
I do not have

[shooting]

No
I do not have
One other thing to try is, when you replaced the panel did you re-seat the connector between the pcb and the panel?
(To do this look beside the CD mech when the front is on and use a firm tool to press the connector back onto the front panel)

[ubistvo]

Yep i try all that
I give up for now with this

[dashradio]

I have had one of these doing the same as yours, the only way I got it to work was with a replacement front panel.

[kamraoui]

try that pu2294B(d) 93c46 rotacja 2254 (1)http://www.eserviceinfo.com/