PDA

View Full Version : Openbox S12 Clone safe


mini
12th March, 2016, 01:10 PM
can somone point mr in the direction of the Openbox S12 clone safe firmware pls.
mini
14th March, 2016, 11:22 AM
Are the s9 s10 s11 s12 all same? do they work on each other?
new to openbox prefer dreamboxes.
martin035
14th March, 2016, 05:07 PM
From searching the web it looks like Feb 2012 was the last release of any firmware for the s12 whether a clone or not, therefore there's a good chance your already running the latest firmware.
mini
14th March, 2016, 05:17 PM
the firmware i installed crashed the box (clone bomb).
mini
22nd March, 2016, 10:08 AM
I downloaded the firmware by Anonymous, it doesnt have any sat list also for some reason it doesnt let me upload tp list either. It say tp list corrupt. But if I use s**box firmware I can upload the same tp list without issues, only problem clone bomb.....:damnmate:
is there clone safe with sat list set up?
mini
26th March, 2016, 04:37 PM
got stable firmware but cant view channels for some reason, due to forum rules it cannot be discussed either.
P&D
26th March, 2016, 04:48 PM
Are you getting the FTA channels ?
mini
27th March, 2016, 01:07 PM
yea, all apart from channel 5. everythinf seems to work apart from **cam, which shows online.

its all ok on my dm500
P&D
27th March, 2016, 06:38 PM
What are you getting on screen No signal or scrambled ?

Go into the setting make sure DHCP is on & reboot the box.....see if that sorts the problem
DW190
27th March, 2016, 11:39 PM
What are you getting on screen No signal or scrambled ?

Go into the setting make sure DHCP is on & reboot the box.....see if that sorts the problem

If that don't work try a fixed ip in the range of your router and change the DNS to Googles. 008 008 008 008 Alternate 008 008 004 004
mini
28th March, 2016, 09:46 AM
tried both, dhcp on/off 2 different routers. scr***led
DW190
28th March, 2016, 07:28 PM
tried both, dhcp on/off 2 different routers. scr***led


Have you tried changing the DNS?
mini
29th March, 2016, 11:59 AM
It does show my thing is online with a tick next to it.
nope did not try DNS, I'll give it a go later.
thanks
mini
30th March, 2016, 07:59 AM
It's working :congrats:
I didnt have to change anything, all I did was used the dm500 looped the output to the S12. Still not getting few channels like ch5, I've made a no signal fix using a diode but still not getting some channels. The major ones most seem to be working :excitement:
mini
30th March, 2016, 10:00 PM
Been playing baout wiv it and it only works when i connect it through the dm500. Otherwise none of the channels work. I tried the sat feed direct, the same one i use for dm500 and it didnt work, even using the diode fix. This box is b****cks. Dm's are the best. This has truly got me confused.
Any thoughts people. All help is much appreciated

Thank you
����������