>>>>>>>>SMOK SUPPORT THREAD<<<<<<<

[javyb]

Today BSi continental on Peugeot 508 my2016. Mileage done but erase keys and after not possible to recover keys or programing so be be careful...

Wysłane z mojego JSN-L21 przy użyciu TapatalkaHow did u manage to fix? If you have

Sent from my SM-N960F using Tapatalk

[remapecu]

How did u manage to fix? If you have

Sent from my SM-N960F using TapatalkDidn't fix waiting to visit in dealer...

Wysłane z mojego JSN-L21 przy użyciu Tapatalka

[cokolo]

Today BSi continental on Peugeot 508 my2016. Mileage done but erase keys and after not possible to recover keys or programing so be be careful...

Wysłane z mojego JSN-L21 przy użyciu Tapatalka

All p508 works fine and always is possible to recover

[remapecu]

All p508 works fine and always is possible to recoverSo you want to recover my 508? I have pincode but bsi doesn't accept pincode ( to verify I ordered in a delear pincode as well) so now I can't learning key's for some reason so last think I can do is visiting in a dealer?

Wysłane z mojego JSN-L21 przy użyciu Tapatalka

[teerak2uk]

smok uhds always says update internal clock for every operation even after update done has anyone had this? (yes i have internet connection) its been happening over the last 5 days

[Rachon]

So you want to recover my 508? I have pincode but bsi doesn't accept pincode ( to verify I ordered in a delear pincode as well) so now I can't learning key's for some reason so last think I can do is visiting in a dealer?

Wysłane z mojego JSN-L21 przy użyciu Tapatalka

I had problem also for program keyless on citroen. did you try to choose continental 2015 and go to advanced and write your pincode ? after that program it with fvdi.

[remapecu]

No i didn't but will try before car go into dealer...

Wysłane z mojego JSN-L21 przy użyciu Tapatalka

[comizelu]

Hi
Anyone tried to program keys for Peugeot 508 2011 keyless system?
Thanks

Sent from my MI MAX 3 using Tapatalk

[gijsvm]

So you want to recover my 508? I have pincode but bsi doesn't accept pincode ( to verify I ordered in a delear pincode as well) so now I can't learning key's for some reason so last think I can do is visiting in a dealer?

Wysłane z mojego JSN-L21 przy użyciu Tapatalka

Not needed to visit dealer.

in instal folder search for flsCNT2m.bin
next reflash bsi.

and after reflash write backup config (xls file)

and done !!!

[remapecu]

I had problem also for program keyless on citroen. did you try to choose continental 2015 and go to advanced and write your pincode ? after that program it with fvdi.Yes that work. After programing same pincode I was able to learn keys. Car started... Thanks Rachon your idea was great...

Wysłane z mojego JSN-L21 przy użyciu Tapatalka

[billykillkelly]

yes mate i changed usb cable and solved..

[ziko]

I have golf5 2007 with burned dash. Tried to adapt used dash, I found pin code,and with VCDS when going in channel 50 after 5min give me access to enter ori car pin code to adapt to engine ecu. When good pin entered vcds write "function not ok" instead to shows ori VIn....
Then I readed edc16 pin ,vin,immo nr,and CS,open sec data from used dash and manually change data,then cheksum and save. Then I put this sec bit ,goes to immo3 entered pin,login...after this all data is changed except mac2,and can't reprogram ori key
Any tips?

[gijsvm]

I have golf5 2007 with burned dash. Tried to adapt used dash, I found pin code,and with VCDS when going in channel 50 after 5min give me access to enter ori car pin code to adapt to engine ecu. When good pin entered vcds write "function not ok" instead to shows ori VIn....
Then I readed edc16 pin ,vin,immo nr,and CS,open sec data from used dash and manually change data,then cheksum and save. Then I put this sec bit ,goes to immo3 entered pin,login...after this all data is changed except mac2,and can't reprogram ori key
Any tips?

I do not fully understand your explanation. but what I think is that you have to go to, "edc16 advance" and that the immo data has to be changed, so that the mac is learned.

[ziko]

But I changed instrument cluster not ecu,if I change immodata in edc16 then keys will not be able to relearn
Edit: I just saw in help that you are right,in edc16 I write ori car data just to learn mac1,will try next car
Edit: maybe must use new megamos
But lets say I have both pins ori and used dash,why can't adapt with VCdS
I usually put in 25 used dash pin,then adaptation channel 50 to merge used dash with ecu,and after all I reprogram iri keys. In this case not going so,in channel 50 after I put ori pin instead to show on top ori VINetc shows "function not ok"

[soxten]

Desolder Eeprom and flash from broken dash and move to used dash.
Must be same number and version number.
Fastes way


Skickat från min iPhone med Tapatalk

[ziko]

Dash dead,if was ok was easy,just read and write sec data and job done

[Rachon]

But I changed instrument cluster not ecu,if I change immodata in edc16 then keys will not be able to relearn
Edit: I just saw in help that you are right,in edc16 I write ori car data just to learn mac1,will try next car
Edit: maybe must use new megamos
But lets say I have both pins ori and used dash,why can't adapt with VCdS
I usually put in 25 used dash pin,then adaptation channel 50 to merge used dash with ecu,and after all I reprogram iri keys. In this case not going so,in channel 50 after I put ori pin instead to show on top ori VINetc shows "function not ok"



On sec bloc you put old power class from edc16 ?

[brend]

Hi.
Have enybody experience vw t5 2014 Year DSG transmission km reset with smok (VW0008 DSG CAN OBD2).
Have enybody done this job?

Transmission type is DSG DQ500-7f

[Ocin]

I already tried on T5, but don't remember year and model of DSG, smok set 0km on some place but not all (don't remember group).
regards

[ziko]

MED17.5.1 vw touran 0261 201 355
03c 906 032 E
Read on table by CAN not goes , see image
Any helps, same problem I hAD with edc16 once

Edit: I once already asked from same ecu and get answer tnx

[cokolo]

Hi.
Have enybody experience vw t5 2014 Year DSG transmission km reset with smok (VW0008 DSG CAN OBD2).
Have enybody done this job?

Transmission type is DSG DQ500-7f

In DQ500 you must install DSG filter in getaway module not possible rest over OBD

[brend]

Thanks!.........



In DQ500 you must install DSG filter in getaway module not possible rest over OBD

[barrn]

have Magic Dash XCan, but can only read no write, not sure why this is? Do you have any advice on this? I bought from Original Smok.com.pl but no support on this

Will read the KM and unlock the dash no problem, but cannot write.

This is for an Audi A4 2009 B8 Model, 8K0920900


If you have latest version of the XCan software can you please send to me? I cannot find it on SmokFTP anymore.

Thank you very much.

[Ocin]

you tried on another model ? does it work ? witch error do you have when writting new mileage ? perhaps you choose wrong model.

[barrn]

you tried on another model ? does it work ? perhaps you choose wrong model.


works on another 2009 a4 model, except this one is CVT and the other is STronic

[samux]

does smok add option frm repair?

[ION CRISTI]

Dash dead,if was ok was easy,just read and write sec data and job done
resolder micronas if the dash dead its vdo and solve the problem

[soxten]

Smoke can adapt a used ABS on Volvo cars
I have done some test here ON BENCH, connected ABS+CEM+ECU and push ”identify”
Smoke finds all 3 unit with info,key,vin etc.
And then I have only ”resete code” as highlight buttom.
If I push that it say something like ”resete ok”
And after I dont know HOW to adapt abs?
I cant do anything more...

Please tell me, ABS seriel number is stored in ECU and if you change ABS tou need to write new seriel number to ecu?

But now to the big problem, many abs control units have same number on hardware, but diffrent software.
And I cant find a way to read Eeprom and Flash by obd(?)
To clone abs you need to do both files.

If I open it up I can read Eeprom but not special ATE TMS 980 mcu...
Does any know a way to read this mcu?

Please need help to find a solution for this.

[Rachon]

MED17.5.1 vw touran 0261 201 355
03c 906 032 E
Read on table by CAN not goes , see image
Any helps, same problem I hAD with edc16 once

Edit: I once already asked from same ecu and get answer tnx

It doesn't work for 99% of ecu edc16 and edc17. I HOPE smok will fix that

[system]

hello
i have Dacia Logan MCV 2017 with Bosch 0265956560 ABS
it is possible make KM ??
i have your full vesrion UHDS but no options

or connection from back side and some dump tool ?


thanks

[Nikola123]

Skoda rapid 2014 add key one minut

Послато са SM-G965F уз помоћ Тапатока

[system]

hello
i have Dacia Logan MCV 2017 with Bosch 0265956560 ABS
it is possible make KM ??
i have your full vesrion UHDS but no options

or connection from back side and some dump tool ?


thanks

[ziko]

BSI Siemens Kline

P206 2001, I read pin,eep but can't program key. I did with PPS,and key ok
After some time costumer call and say smelt like smoke in BSI, Normally not from DIAG ONLY, but this is second car , once was C3, both cars key lost, used smok to program key and after that (less than hour) smok in bsi
Hope nothing wrong with smok, maybe just bad luck

[bugarcek]

Clio 4 2013.... Km changed with block option. Now trip and consumption does not work.... Any solution except doing abs millage without block synchro?

[gijsvm]

Clio 4 2013.... Km changed with block option. Now trip and consumption does not work.... Any solution except doing abs millage without block synchro?

Only solution is doing ABS too...

[Businessrm]

SMOK can not do SEAT EXEO 2008+ BOSCH RB8.

[javyb]

SMOK can not do SEAT EXEO 2008+ BOSCH RB8.I've done lots exeo no problem 2009 2012 2011

Sent from my SM-N960F using Tapatalk

[Businessrm]

Tell me who knows please if SMOK can write ECU meliage in Ford. :-)
I don`t wont to buy X-Tool for this.

[bugarcek]

Only solution is doing ABS too...Interesting on MEGANE 3 i never had that problem...

[scoot]

Hi I am thinking of buying SMOK JTAG full .promotion e980 http://smok.com.pl/index.php?id_product=241&controller=product&id_lang=2 any one know if everything works as supposed to and is it good value thanks in advance scoot

[Nicolas9]

Tell me who knows please if SMOK can write ECU meliage in Ford. :-)
I don`t wont to buy X-Tool for this.

dont think smok can do.

but x-tool can't do it for sure :P

[ziko]

Need to replace edc16cp04 ecu on audi Q7 2008y
Ori shows cheksum error, I read all immo data from ori and used ecu. Need to go where car is, so will it works on car procedure like let's say golf6 with edc17? Immo4 I guess should perform after wrote ori data to donor ecu,is it?
Tnx

Solved

[frontpager]

CAN Analyser

Are there instructions on how to use the CAN Analyser?
I want to know how to use it properly. For instance I tried the Save Config option but it seems to save the same data no matter what car I'm at.
Presume I'm doing something wrong.
Anyone guide me on this?
Thanks
Pager.

[atomiczen]

i have problem with 9df changing mileage
i have read eeprom with programmer but smok recognize this software as unknow version.
here eeprom, i need 2000km and i can test immediatly solution

[ziko]

Can someone tell me step by step w204/w212 mileage change without CAN blocker?
1. Go in ZGW and press block ezs sync?
Should I first read for beckup flash+eep or will read when oress ezs block sync(not wanna read twice flash)
How time it takes,do I need battery charger?
2. Now change in dash?


Tnx

[teerak2uk]

Don't need a battery charger always make backups and there is a pdf


http://smok.com.pl/index.php?id_product=256&controller=product&id_lang=2

[ziko]

Don't need a battery charger always make backups and there is a pdf


http://smok.com.pl/index.php?id_product=256&controller=product&id_lang=2
Thanks for info,in pdf write to press block sync and smok automatically make beckup and then load and write patched flash

[ziko]

Hm, first I found when searching ZGW :(

https://www.digital-kaos.co.uk/forums/showthread.php/685091-ZGW-Mercedes-W212-Year-2014-need-Flash-Eeprom-or-please-repair


https://www.digital-kaos.co.uk/forums/showthread.php/654715-Mercedes-W204-ZGW-help

[Rachon]

Hm, first I found when searching ZGW :(

https://www.digital-kaos.co.uk/forums/showthread.php/685091-ZGW-Mercedes-W212-Year-2014-need-Flash-Eeprom-or-please-repair


https://www.digital-kaos.co.uk/forums/showthread.php/654715-Mercedes-W204-ZGW-help



If the battery is good don't need charger. go to zgw read ee and flash. after push block sync it will read again for backup. and after go to dash and change. smok will do the his business on dash it will be 0km 99999km but in the end right km will be on dash.

[ziex]

Hi,

Smok message:

1163R0377447RA esp bosch uknown version.

Any one can help

Ziex

[goran81]

Hello,
can somebody help me with corect procedure to make km recalibration on volvo v40 2015 year with UHDS,
want to make all places wihout blocking sync with dash,
UHDS detects it like 2013... model,
i choose reprogram dash plus cem 2013...
procedure goes ok and correct km appears but ok untill car start engine, old km goes back,
front doors are disconnected, probably in CEM problem,
does battery need to be disconnected and when
Thanks in advance

[remapecu]

Hi guys
Any one of you done Citroen C4 MY2010 by OBD ? It is safe or better do it manual ? Thanks in advance

[honingkoning]

Hi guys
Any one of you done Citroen C4 MY2010 by OBD ? It is safe or better do it manual ? Thanks in advancePSA with smok is super.
Last one I did all by diag in couple of minutes.

Wbr

[TOINO]

I just did talisman 2017, in that I understood the smok does the dash first with abs locking lasts for about 30 minutes then can do abs eobd, I saw with clip on abs miles corrected

[rokibar]

PSA with smok is super.
Last one I did all by diag in couple of minutes.

Wbr
except if newer valeo bsi. can't read pin and can't programming key.

[didi_du_93000]

except if newer valeo bsi. can't read pin and can't programming key.


You talk about Peugeot 3008 last one?

[rokibar]

You talk about Peugeot 3008 last one?
i had this problem at c3 from 2014 read pinfrom bsi and key programing.. pin readed with function read pin by can 2000-2016 success. key added with lexia. my seller ask about it in smok and they told maybe problems in usb or laptop but it is not true. my devices work at another models well.
********** START LOG Sesion **********
11/22/2018 4:46:49 PM BOX SW 00000436/1143 AllInOne 3.4.2.2 11/10/2018 3:35:10 AM BOX SN SN 1903492 PSA Explorer UHDS Peugeot Citoen v 3.4.2.2 11/10/2018 3:35:10 AM
opcja=Learn Keys
BSI Valeo UDS
Learning Keys (UDS) ...
Licence Accepted
PIN = F4QH
Numers of Keys = 2
Init Error
Learn Keys Error !!!


********** END Sesion **********
********** START LOG Sesion **********
11/22/2018 4:33:38 PM BOX SW 00000436/1143 AllInOne 3.4.2.2 11/10/2018 3:35:10 AM BOX SN SN 1903492 PSA Explorer UHDS Peugeot Citoen v 3.4.2.2 11/10/2018 3:35:10 AM
opcja=Read PIN
Sesion Start 4:33:34 PM
BSI Valeo UDS
BSI Valeo UDS
Licence Accepted
No Comunication
Erasing Flash...
Erase Error - TimeOut!!!
Reading Pin...
Read Pin Error


********** END Sesion **********

********** START LOG Sesion **********
11/22/2018 4:33:10 PM BOX SW 00000436/1143 AllInOne 3.4.2.2 11/10/2018 3:35:10 AM BOX SN SN 1903492 PSA Explorer UHDS Peugeot Citoen v 3.4.2.2 11/10/2018 3:35:10 AM
opcja=Read PIN
Sesion Start 4:33:07 PM
BSI Siemens,Valeo,JC, JC2015
BSI Siemens,Valeo,JC, JC2015
Read Pin EE Please Wait...
Licence Accepted
BSI Siemens,Valeo,JC, JC2015
No Comunication


********** END Sesion **********

[inaro]

Have enybody experience Megane IV Year2016 km reset with smok .

[rafalgt]

Hi.
I have a problem with Renault ECU SID309.
I did everything as in the instructions, the mileage has been reset.
After connecting to the car, the mileage is like on the dash.
But the car does not start, no crunking... ther is no DTC's.
Any sugestions?

[teerak2uk]

Hi.
I have a problem with Renault ECU SID309.
I did everything as in the instructions, the mileage has been reset.
After connecting to the car, the mileage is like on the dash.
But the car does not start, no crunking... ther is no DTC's.
Any sugestions?Lost injector codes or bent pin in plug!!!

What did you scan it with and can you talk with ECU?

[rafalgt]

Hi,
Injector codes are OK, pin in plug the same...
I scaned it with CLIP and there are't DTC's.

After write original eeprom car start.
This software error.

[r6eck]

[QUOTE=rokibar;3516036]i had this problem at c3 from 2014 read pinfrom bsi and key programing.. pin readed with function read pin by can 2000-2016 success. key added with lexia. my seller ask about it in smok and they told maybe problems in usb or laptop but it is not true. my devices work at another models well.


I have same issue with 2010 C3 today, read pin ok, learn key error.
Lexia code key without any issue.

[brend]

Renault Scenic 3 (2013) abs new km obd2 away done well?
10 min and job done.......:)

[Happy786786]

Was it full obd ?


Sent from my iPhone using Tapatalk

[Happy786786]

Renault Scenic 3 (2013) abs new km obd2 away done well?
10 min and job done.......:)

Was it full OBD ? bsi & Dash


Sent from my iPhone using Tapatalk

[brend]

My post about only abs.


Was it full OBD ? bsi & Dash


Sent from my iPhone using Tapatalk

[dudus8]

Hello,

tried to set a new mileage in Ducato 2014 year before lift via module ft009 by obd?
Regard

Wysłane z mojego SM-G973F przy użyciu Tapatalka

[kams20040]

Renault master year 2018 possible ????

Need i do dash only ...or must i do abs ????

[Ocin]

Renault master year 2018 possible ????

Need i do dash only ...or must i do abs ????Only dash

Envoyé de mon LYA-L29 en utilisant Tapatalk

[peko]

Renault master year 2018 possible ????

Need i do dash only ...or must i do abs ????


and ecu also ;)

[doditntd]

hello. i have buied smok. how install usb drivers on windows 10 ? i have installed the file setup.exe, but when connect uhds, usb not recognized.
please help me.
thanks

[vasa]

hello. i have buied smok. how install usb drivers on windows 10 ? i have installed the file setup.exe, but when connect uhds, usb not recognized.
please help me.
thanks

Check instal folder drivers is there

[doditntd]

Check instal folder drivers is there

i have cheched and installed but under windows 10 always not recognized

[yugo45]

Anyone can give me feed back on Mercedes W463 (G Class) 2014-2015 models .
I need go up with km , so Can filter will not need , Just need to know how good is By OBD?

[SKYTON]

what licence for renault kangoo with this cluster

[yugo45]

Anyone can give me feed back on Mercedes W463 (G Class) 2014-2015 models .
I need go up with km , so Can filter will not need , Just need to know how good is By OBD?


Anyone done this car???

[Mak88]

hello do you know how to make proxy alignment with the smok uhds becouse i have usue with the fiat Bravo 1,3jtd some one try to make km and no is blink is is posible to make it it the smok thanks alot

[didi_du_93000]

hello do you know how to make proxy alignment with the smok uhds becouse i have usue with the fiat Bravo 1,3jtd some one try to make km and no is blink is is posible to make it it the smok thanks alot You can use any cable with free version of multiecuscan.

Full working.

Envoyé de mon LYA-L29 en utilisant Tapatalk

[ATRON]

I am customer Smok ,but i need good tool or calculator to make Ecu mileage stored,that work fine and cover a lot of models of cars.EDC17 ,SID,etc ...Send me message private.

[Ocin]

I am customer Smok ,but i need good tool or calculator to make Ecu mileage stored,that work fine and cover a lot of models of cars.EDC17 ,SID,etc ...Send me message private.

NEO8 , you can use also smok dump calculator

[rendezo]

Hello,

I need help!

I try to flash an V70 Dasboard (2010) with smok. ( I made full dump before) , and after is is DEAD.

The Dash not turn on, just 2 light blinks.

And the smok unable to flash, always : INIT ERROR... show up.


Is it possible to reapir somehow?


Than You !

[peko]

hi friends

anybody know way about this on polo 2012/07

i not undestand why not work, anybody know how use sw ?

thanks ;)

[honingkoning]

hi friends

anybody know way about this on polo 2012/07

i not undestand why not work, anybody know how use sw ?

thanks ;)Try with JC option sw indication ost of the time incorrect

[ghostrider72]

Im not using that option much but I think you should read S-key first. Than change whatever you want

[SKYTON]

what licence for renault kangoo with this cluster

no one know this dash ?

[teerak2uk]

no one know this dash ?What year. . is probably RT0002

[sendreq]

hi friends

anybody know way about this on polo 2012/07

i not undestand why not work, anybody know how use sw ?

thanks ;)

Dash is VDO (in HW you can see VDD), read S-key first to get access, then change km.

[peko]

hi friends

anybody have pinout dash master 2018
is rent car and obd socket is cut of so .....

thanks ;)

[dudus8]

Hello,
I have a question:
is it possible to set the mileage on the dashboard in Passat B7 2014? If yes, which module?

Wysłane z mojego SM-G973F przy użyciu Tapatalka

[Dayo]

Ayone tried the latest 2018 ford transit R7F (rh850) license? Any success?

[jetronic30]

Ayone tried the latest 2018 ford transit R7F (rh850) license? Any success?

my did not do that

[dudus8]

Hello,
Does anyone have any experience with this module?
http://smok.com.pl/index.php?id_product=352&controller=product&id_lang=2
Can you read and save maps to the Tuning in Fiat Ducato 2.3 Euro 6 with this module?

[teerak2uk]

Hello,
Does anyone have any experience with this module?
http://smok.com.pl/index.php?id_product=352&controller=product&id_lang=2
Can you read and save maps to the Tuning in Fiat Ducato 2.3 Euro 6 with this module?what hp and year is it

[Palmier]

Hello,
Does anyone have any experience with this module?
http://smok.com.pl/index.php?id_product=352&controller=product&id_lang=2
Can you read and save maps to the Tuning in Fiat Ducato 2.3 Euro 6 with this module?
Hello,

Read/Write 9DF OK

Be careful, NO CKS !

[Palmier]

On Ducato 2.3 MultiJet 150 EURO6

[dudus8]

On Ducato 2.3 MultiJet 150 EURO6Ok thans for you info
This module work stable with 9df?
I heard somewhere that the correction of sums for Marelli 9df is not required when saving the modified file, but I'm not sure.

Wysłane z mojego SM-G973F przy użyciu Tapatalka

[dudus8]

what hp and year is it2017 year 150hp
Ducato 2.3 euro 6

Wysłane z mojego SM-G973F przy użyciu Tapatalka

[sjc1]

Can smok read flash via obd on volvo edc16c31? 2009 s40 D5?

[esse]

Hi,
Fiat 500X TFT 2019 with R7F701401 EAFB
read ok
write failled
reset command refused !!!62

[peko]

tiguan 2012 TFT not work
no way to read skey ...
prepar epp also no way to read skey ...

not write but not crash

[catalinosonesti]

hy everyone, how i can read with carprog this MC9S12XHZ256 to cange km ford kuga .thx

[javyb]

hy everyone, how i can read with carprog this MC9S12XHZ256 to cange km ford kuga .thx

Wrong thread this is about SMOK uhds

Sent from my SM-N960F using Tapatalk

[Palmier]

Ok thans for you info
This module work stable with 9df?
I heard somewhere that the correction of sums for Marelli 9df is not required when saving the modified file, but I'm not sure.

Wysłane z mojego SM-G973F przy użyciu Tapatalka
Only tried 1 time but seems very stable and quick

[Ocin]

Anyone know if land rover all terrain module change KM and hours by obd work?

Envoyé de mon LYA-L29 en utilisant Tapatalk

[PremierD]

yes ..................

[catalinosonesti]

Ok. Sorry i look. Carprog

[gijsvm]

tiguan 2012 TFT not work
no way to read skey ...
prepar epp also no way to read skey ...

not write but not crash

What you have to do is put ignition on, and at the same time push read skey obd.
sometimes you have to do this method a few times, but it will work

[peko]

What you have to do is put ignition on, and at the same time push read skey obd.
sometimes you have to do this method a few times, but it will work

yes i know it
i made it lot of times, also remove battery during 10 min ... no way friend to read S-key

[Palmier]

Hello,

Tried Berlingo 2010 today, JC BSI.

Block synchro don't work.

Original KM jump back.

[alkaskad]

Is there MM dashboard? You need to do dashboard manually...

[Ocin]

tiguan 2012 TFT not work
no way to read skey ...
prepar epp also no way to read skey ...

not write but not crashI had this problem few month ago.
No way to read skey golf 6 audi etc...
I make an update and now work fine.

Envoyé de mon LYA-L29 en utilisant Tapatalk

[Palmier]

Is there MM dashboard? You need to do dashboard manually...
Yes.... MM dashbord...

Need remove it ?

Block synchro will never work ?

[centrohifi]

did you read Marelli 9MD ?? I read .. but still not written!

[r6eck]

Can hyundai ioniq be done with Smok ?

[gijsvm]

Can hyundai ioniq be done with Smok ?

Yes it can be done

[r6eck]

I see it now

[Palmier]

did you read Marelli 9MD ?? I read .. but still not written!
Hello,

I read 9DF, not 9MD

[Palmier]

I read and write *

[km666]

Hi All,

Renault Trafic EDC16,and EDC17 work ok by OBDII with smok?

Regards,

[Ocin]

Hi All,

Renault Trafic EDC16,and EDC17 work ok by OBDII with smok?

Regards, You can't erase main odometer in ecu by obd, only some location. Must read the ecu by bdm


Envoyé de mon LYA-L29 en utilisant Tapatalk

[VDO]

Did smok can do scenic 3 dash or only abs?

[Ocin]

Did smok can do scenic 3 dash or only abs?

smok do only abs

[dudus8]

Has anyone tested this module?
http://smok.com.pl/index.php?id_product=143&controller=product&id_lang=1
Is there a change in mileage in the Marelli MJ9DF ECU?

[didi_du_93000]

send file i will check

[dudus8]

Hello,
Do you need eeprom form Ducato MJ9DF for check this module?

[dudus8]

send file i will check

Dump eeprom from Ducato MJ9DF

[didi_du_93000]

check result

[dudus8]

check resultWorks fine?
I wonder if he corrects checksums when changing kilometers? What do you think? Could you check it out?

Wysłane z mojego SM-G973F przy użyciu Tapatalka

[catalinosonesti]

hy , need dump for skoda octavia dash 1z0 920 812d with 226 000 km ,i read and write with carprog but when i put dash on car apeears 250.000 ,
please help because i check with lincnik 48 tel me i have 226... i dont now were i mistake .
thank all
https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/paperclip.png Attached Files

https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/zip.gif babi skoda.zip (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=621520&d=1558461219) (1.4 KB, 0 view

[didi_du_93000]

Works fine?
I wonder if he corrects checksums when changing kilometers? What do you think? Could you check it out?

Wysłane z mojego SM-G973F przy użyciu Tapatalka

I don't thinks will calc the checksum

[Haker5]

smok is supported that version

ID: 5F0920951F
SW: 2511
HW: EV_DashBoardVDDMQBAB

[RIMKACHIP]

Hi all new license PT0017 learn VIN radio. Not working test with 5 cars. I wait update because nothing work. Anyone bought this license ? New license of 24 may.


Envoyé de mon iPhone en utilisant Tapatalk

[vasa]

Hi all new license PT0017 learn VIN radio. Not working test with 5 cars. I wait update because nothing work. Anyone bought this license ? New license of 24 may.


Envoyé de mon iPhone en utilisant Tapatalk
Why bay licence for VIN radio? Diagbox can do it whitout problem.

[RIMKACHIP]

If you can change vin on smeg+ with diagbox call me !! Only online


Envoyé de mon iPhone en utilisant Tapatalk

[didi_du_93000]

If you can change vin on smeg+ with diagbox call me !! Only online


Envoyé de mon iPhone en utilisant TapatalkYou have tested on what car?
308 II ?


With Tapatalk

[RIMKACHIP]

Not tested on 308 II but smeg+ is on Peugeot 308 and C4. with diagbox only online. With smok normally is ok but not tested.


Envoyé de mon iPhone en utilisant Tapatalk

[didi_du_93000]

Not tested on 308 II but smeg+ is on Peugeot 308 and C4. with diagbox only online. With smok normally is ok but not tested.


Envoyé de mon iPhone en utilisant TapatalkSo I will wait to have feedback of working activation... [emoji28][emoji28][emoji28]

I have not lose my money thanks to DK!!!

With Tapatalk

[lagaffe]

hi,
have change vin on smeg+ 308/208/3008 with diagbox 9.23 (select smeg manually, don't let diagbox choose smeg+, change vin, operation finish with error but vin changed!)
++

[Mak88]

Hello do you know on obd cabel pin out thanks alot

[Palmier]

Read / Write EEP&FLASH MJD8F3 on Ducato Euro5 with module "IAW8Fx Advanced CAN" : OK

[didi_du_93000]

Smeg+ citroen c4 2016 vin change ok.

Also just to tell who is my seller.

http://www.obdtool.nl/

Very fast service.

Even smok manufacturer not faster!!!! [emoji23]

10 minutes activation done all time.

Reply on all messages on skype or email.

I love services like this!!!

With Tapatalk

[RIMKACHIP]

Not tested on 308 II but smeg+ is on Peugeot 308 and C4. with diagbox only online. With smok normally is ok but not tested.


Envoyé de mon iPhone en utilisant Tapatalk

After new update all is ok. Now working well.


Envoyé de mon iPhone en utilisant Tapatalk

[peko]

hi friends

anybody check about iveco 2017 BCM calculation ?
because with smok mod engine not start ... with ori engine start ...

[astriunfao]

Hello, i have uhds and jtag smok. try reading WITH UHDS skey by jtag golf v cluster 2006 micronas cdc3217g.
read skey ok, but file all FFFFFF. reading flash uhds jtag read ok. file all FFFFF
later i try read flash by multriprog jtag and flash read data ok. but i need skey. how to? help please

[astriunfao]

Where is the smok support? I've tried to get support BY SKYPE EMAIL and nobody answers.

[Happy786786]

Law has been changed in Poland so they won’t be able to help yet maybe in the future


Sent from my iPhone using Tapatalk

[hrmotorsport]

Can someone give me exact pinout to read and flash 908AZ60 2j74y on vito dash w638 ??? i cant do anything

[brend]

Hi!629218

Any body have this problem like my!

One day ago bay xxxxxx dash function ,payment done (paypal away)and thats all!!!!!....:mad-new:
No answers ! No key activation ! No email answer ! No skype answer! Just totaly nothing!!!!!!!

Money gone and all that!!!!??????

[gijsvm]

Can someone give me exact pinout to read and flash 908AZ60 2j74y on vito dash w638 ??? i cant do anything

Open multiprog and push "HElp" and there you found the pinout for this mcu ..

[gijsvm]

Hi!629218

Any body have this problem like my!

One day ago bay xxxxxx dash function ,payment done (paypal away)and thats all!!!!!....:mad-new:
No answers ! No key activation ! No email answer ! No skype answer! Just totaly nothing!!!!!!!

Money gone and all that!!!!??????

Did you do "set license online" to or just wait for answer ?

[brend]

I know thats!
Tryed !!!!!
Today all day tryed with email,skype,online set ........just nothing !!!

And I'm still without activation code......:banghead:


Did you do "set license online" to or just wait for answer ?




Before no problem with this and now 2 days just crap from smok!

[astriunfao]

DO NOT UNDERSTAND ANYTHING WHEN THIS WILL BE SOLVED? even when there will be no support or help ?. what has happened so that they can not answer at least with a yes or no or do this. small shit

[hrmotorsport]

sir, i am not newbie, help in doc folder is not enough, i use pinout apears as default from 908AZ60 but cant access to mcu, so, i asked if someone have pinout onboard dash vito w638 TESTED

thanks

[brend]

Problem with smok solved!:)
Today apologized for something that so long!

All ok...............629442

[Faraday]

Hi!629218

Any body have this problem like my!

One day ago bay xxxxxx dash function ,payment done (paypal away)and thats all!!!!!....:mad-new:
No answers ! No key activation ! No email answer ! No skype answer! Just totaly nothing!!!!!!!

Money gone and all that!!!!??????


june 20th is holiday in Poland

[pierre renault]

Hi, does Peugeot 3008 2017 work ( KM) by OBD?

[Repinator]

only BSI via OBD

[Palmier]

Hi, does Peugeot 3008 2017 work ( KM) by OBD?
You need to remove the dash for 95160.

[automotrizVIP]

Acquired Renault EU0003 license. reading is good and writing equally but when you click Virginize it does not make any change, the car is still off.
I believe that this License is not completely finished or is in development.
tested in ecu 3132,32N

Any idea what I should do to make it work?
Any additional process I'm forgetting to do?

[hrmotorsport]

I tested on sirius and works, if you click on virgin and put ignition on then reprogram




Enviado desde mi iPhone utilizando Tapatalk

[gijsvm]

Acquired Renault EU0003 license. reading is good and writing equally but when you click Virginize it does not make any change, the car is still off.
I believe that this License is not completely finished or is in development.
tested in ecu 3132,32N

Any idea what I should do to make it work?
Any additional process I'm forgetting to do?

Did you programm on bench or with ecu in car ?

[automotrizVIP]

Did you programm on bench or with ecu in car ?

I read ecu in Bank. Try to work 2 times Sirius 32 and 3132, but the car does not want to turn on, I will have to go back to my previous entry, download flash and read it. I wanted to avoid that. I think I lost my allowance

[gijsvm]

I read ecu in Bank. Try to work 2 times Sirius 32 and 3132, but the car does not want to turn on, I will have to go back to my previous entry, download flash and read it. I wanted to avoid that. I think I lost my allowance

Why should it go on ? By using the virgin function it doesn`t mean that car start, it only virginize ecu. Use a immo off file or use emulator.

[automotrizVIP]

Why should it go on ? By using the virgin function it doesn`t mean that car start, it only virginize ecu. Use a immo off file or use emulator.

But I did it the old way, and it's already turning on. Instantly, the car went for a walk. And I here Crying For A License That Was A Failure...
I'll have to be careful not to buy more unusable stuff

[Palmier]

Tried 2018 Fiat500X, read work OK but write ERROR...

[toutougsmserver]

dacia 2014 dashboard+block abs there is a bug in last update
tried 3 dacia same problem read flash stop at 20-25
i used old software and all ok

hope they solve that in next update

[ghostrider72]

Hi
Did someone programmed spare proxy key to Citroen C4 Grand Picasso with Smok? 2016 if that matters

Thanks

[didi_du_93000]

Hi
Did someone programmed spare proxy key to Citroen C4 Grand Picasso with Smok? 2016 if that matters

ThanksI do one.
But to the keyless work I always use the diagbox.


With Tapatalk

[ghostrider72]

I do one.
But to the keyless work I always use the diagbox.


With Tapatalk

Is it easy to find that function in Diagbox? I’m using it very often lol

Thanks

[Milage doctor]

hi guys just brought a uhds from smok but it come with only a obd cable. where can i get the other lead for the pc? also where can i download the software//.. many thanks

[teerak2uk]

hi guys just brought a uhds from smok but it come with only a obd cable. where can i get the other lead for the pc? also where can i download the software//.. many thanksUsb lead eBay software from their download section

[RIMKACHIP]

I noticed that I can not connect anymore bsi Siemens Kline since the last updates !! I have the message that tells me to connect pin7 to pin 11 for Uhds<5000 sn .while it worked very well before. could someone check please thanks. I don’t know if my device have problem of software problem or obd cable.


Envoyé de mon iPhone en utilisant Tapatalk

[toothless]

I want to know how to use it. I am a beginner. I need your help.
kia / carnival 2016
Change cluster mb91f061 km
ecu edc17c57
I want to change dpf km .......
I want to match the cluster

[toothless]

I want to know how to use it. I am a beginner. I need your help.

kia / carnival 2016
Change cluster mb91f061 km
ecu edc17c57
I want to change dpf km .......
I want to match the cluster

[centrohifi]

Module Renault RT0021 Talisman Megane4 Kadjar ...ecc .ecc 440Euro .....

"Attention does not work on Kadjar 2017 " ... reading error !!
sent eMail for info ... DO NOT RESPOND !!!
:( :( :(

[didi_du_93000]

Module Renault RT0021 Talisman Megane4 Kadjar ...ecc .ecc 440Euro .....

"Attention does not work on Kadjar 2017 " ... reading error !!
sent eMail for info ... DO NOT RESPOND !!!
:( :( :(In your dream reply of smok support!!!
[emoji23][emoji23]

With Tapatalk

[baltazar3]

Hello to all !
Today try to swap PCR2.1 on Octavia 1.6 TDI.
PIN from dash is 1407 and SMOK say "PIN to short" ...is 01407 have to enter ?

[teerak2uk]

Hello to all !
Today try to swap PCR2.1 on Octavia 1.6 TDI.
PIN from dash is 1407 and SMOK say "PIN to short" ...is 01407 have to enter ?Yes sometimes need to put 0 as first digit

[rokibar]

AGAIN C3 from 2013 bsi valeo can't read pin code from bsi, can't programm key also. pin extracted with adv function with one working key. asked in smok via my dieler several mounts ago. they said my laptop bad or usb cable no good. still no fixed this problem.

[centrohifi]

repetitive response, assistance !!
I have all Dell ... them, which laptop to use ??
today I can't read dash Dacia Stepway .. worked other dacia OK !!!

maybe too hot !!!

[ghostrider72]

AGAIN C3 from 2013 bsi valeo can't read pin code from bsi, can't programm key also. pin extracted with adv function with one working key. asked in smok via my dieler several mounts ago. they said my laptop bad or usb cable no good. still no fixed this problem.

I did that car few weeks ago. Works fine with me

[gijsvm]

Module Renault RT0021 Talisman Megane4 Kadjar ...ecc .ecc 440Euro .....

"Attention does not work on Kadjar 2017 " ... reading error !!
sent eMail for info ... DO NOT RESPOND !!!
:( :( :(

They answer you when you follow this instruction: http://smok.com.pl/img/cms/Help/HELP/Pomoc_online_en.pdf

But 95% of the customer send a verry short email and only write: "Kadjar 2017 give read error" without giving any information about the car at all, like log files, picture dash, etc, etc !!! When they get this kind of emails there is a change they should not answer you.

[Repinator]

HIT!!!!!!!!!!

-Added support Dashboard Jonson Control JCI MQB Golf7, Passat, Octavia 32013... (Jtag+OBD) 70F3426+95128
-Read /Write Km
-Reflash Dashboard OBD

[rokibar]

I did that car few weeks ago. Works fine with me
you sure valeo bsi? what can be reason device read pin via advance function with working key but can't from bsi and can't learn key also. other models working well. it can't be laptop or usb cabbles i am sure.

[Palmier]

HIT!!!!!!!!!!

-Added support Dashboard Jonson Control JCI MQB Golf7, Passat, Octavia 32013... (Jtag+OBD) 70F3426+95128
-Read /Write Km
-Reflash Dashboard OBD
Anyone know if it's JTAG or OBD or both ?

This is not clearly explained...

[Palmier]

Here is the doc : https://gofile.io/?c=4pzKuv

[Happy786786]

Anyone know if it's JTAG or OBD or both ?

This is not clearly explained...

Both apparently


Sent from my iPhone using Tapatalk

[centrohifi]

They answer you when you follow this instruction: http://smok.com.pl/img/cms/Help/HELP/Pomoc_online_en.pdf

But 95% of the customer send a verry short email and only write: "Kadjar 2017 give read error" without giving any information about the car at all, like log files, picture dash, etc, etc !!! When they get this kind of emails there is a change they should not answer you.


yes friend, I know this procedure. But for assistance it is a problem in our PC !!

[jetronic30]

In your dream reply of smok support!!!
[emoji23][emoji23]

With Tapatalk

I agree because SMOK is a cheater, they have nothing like "complaint or help" whatever happens, it will always be your fault,

[javyb]

I agree because SMOK is a cheater, they have nothing like "complaint or help" whatever happens, it will always be your fault, Depends on which channels you use to get support. I never had problem

Sent from my SM-N960F using Tapatalk

[jetronic30]

Depends on which channels you use to get support. I never had problem

Sent from my SM-N960F using Tapatalk

conversation with the boss, extremely arrogant type:crushed:

[offsystem]

Copy paste company [emoji2960]

[javyb]

Copy paste company [emoji2960]There all copy pasting at the moment all the so called big companies

Sent from my SM-N960F using Tapatalk

[2pl0mat]

depents what people understand of " support"
i bouht a defective smok jtag and had to repair by my self
2 months old
and finaly was a defected part inside
no one told me to send back
the only one they say ...try different pc
different installation ect

[Repinator]

HIT!!!!!!!!!!

-Added support Dashboard Jonson Control JCI MQB Golf7, Passat, Octavia 32013... (Jtag+OBD) 70F3426+95128
-Read /Write Km
-Reflash Dashboard OBD

Today I tested a Touran JCI 5TA920751, without luck :(

[chrisi1909]

Don´t know in what Version this Glitch appeared...Version 3.5.2.8 :
Audi A4 8E RB8 Dash 8E0 920 933 SX - always Message "init Error" and no Connection.
But all other Tools like VCDS can connect just fine to the Dash :(

[Milage doctor]

how do you get the eeprom data in a rar format? mine saves on my pc as a bin file and it wont let me post this


Dump eeprom from Ducato MJ9DF

[Happy786786]

Hi there
Can someone tell as I’m talking of buying Smok on a PSA Software to work On French cars ect
What I’d need know whether it can do full obd Cluster & bsi on Peugeout Partner 2010 Model without removing Cluster
As some tool does bsi obd and you do Cluster Manually by taking out

Tanx




Sent from my iPhone using Tapatalk

[amigokola]

Hi Guys..
Is it possible to adapt used ECU - EDC17C46 UDS with SMOK ??
It reads data by CAN connection good but it doesnt do adaptation properly by OBD in car (doesnt change MAC).
This is Passat CC 2012.
Rgs.

[marinescuv]

uhds is the best vag edc17 immo 4
read manual

[Happy786786]

Hi
Is it safe on Hyuandi i140 2015


Sent from my iPhone using Tapatalk

[amigokola]

I read manual but this is Passat CC immo 3/4 and as you know it is a bit different as for ELV/CCM/ECU involved.
I read ECU by CAN connection on bench and got all data.
Power Class is different. In car it is FE and In used ECU 60.
Tried to write it in CCM bu still immo active.
Dont know is it possible to adapt ECU with other Power Class ??
It is my first ECU adaptation in Passat....
Any suggestions are appreciated :)


uhds is the best vag edc17 immo 4
read manual

[marinescuv]

post vag nr used ecu

[amigokola]

03L907309AE EDC17c46


post vag nr used ecu

[didi_du_93000]

Hi there
Can someone tell as I’m talking of buying Smok on a PSA Software to work On French cars ect
What I’d need know whether it can do full obd Cluster & bsi on Peugeout Partner 2010 Model without removing Cluster
As some tool does bsi obd and you do Cluster Manually by taking out

Tanx




Sent from my iPhone using TapatalkYou have differents solutions by uhds.

1. Full obd2 work like, ds3, ds5, 208...
2. Bsi by obd2 with flash blocker to stop the communication from BSI to cluster sync. (not the best solution because the old mileage is always in cluster memory)
Not possible on all bsi manufacturers.
2. Bsi by obd2 and cluster manually

On Peugeot partner you can do bsi by obd2 and cluster manually, or also possible bsi flash blocker.


With Tapatalk

[Happy786786]

You have differents solutions by uhds.

1. Full obd2 work like, ds3, ds5, 208...
2. Bsi by obd2 with flash blocker to stop the communication from BSI to cluster sync. (not the best solution because the old mileage is always in cluster memory)
Not possible on all bsi manufacturers.
2. Bsi by obd2 and cluster manually

On Peugeot partner you can do bsi by obd2 and cluster manually, or also possible bsi flash blocker.


With Tapatalk

Ok Tanx for the updates on Smok I thought perhaps it’d be like Abrites which does full obd Cluster & bsi On Peugeout Partner ect


Sent from my iPhone using Tapatalk

[Happy786786]

Hi there
Has anyone tried the new software VW Johnson’s yet 645084


Sent from my iPhone using Tapatalk

[Landetos]

nobody? strange...

i really wanted to know if and how...any feedbacks?

[javyb]

nobody? strange...

i really wanted to know if and how...any feedbacks?Yes I done a Johnson control dash and worked perfectly

Sent from my SM-N960F using Tapatalk

[blackpirate]

Hi there
Has anyone tried the new software VW Johnson’s yet 645084


Sent from my iPhone using Tapatalk


a friend just done one!
easy job , just be carefull and read on manual (support list) and yeah, uncheck Advanced select flash for write , so dash reflash is to be made automatically!;)
cheers

[drpeter]

a friend just done one!
easy job , just be carefull and read on manual (support list) and yeah, uncheck Advanced select flash for write , so dash reflash is to be made automatically!;)
cheersI also tested a golf 7 2013 all ok , touran 2017 smok UHDS say its JC but it isn't, i did not tried it.

[Repinator]

Hi, does Ford S-Max 2016 work ( KM) by OBD?

[teerak2uk]

Hi, does Ford S-Max 2016 work ( KM) by OBD?Should do. .

[javyb]

Anyone tried smok on Volvo Siemens sid803A read write? Does it work obd or do you need to do by pinout

Sent from my SM-N960F using Tapatalk

[gijsvm]

Anyone tried smok on Volvo Siemens sid803A read write? Does it work obd or do you need to do by pinout

Sent from my SM-N960F using Tapatalk

Open uhds program, click on "Help" and software shows you picture how to connect uhds on bench to ecu.

[javyb]

Open uhds program, click on "Help" and software shows you picture how to connect uhds on bench to ecu.Yes I know but was wondering if a obd read is possible in the car

Sent from my SM-N960F using Tapatalk

[cokolo]

Yes I know but was wondering if a obd read is possible in the car

Sent from my SM-N960F using Tapatalk
Not possible , I try last year .

[nourauto]

golf GTD 2016 VDO not ok

[brend]

Which away not done?




golf GTD 2016 VDO not ok

[esse]

Hi,
tried ford fiesta 2019
Read ok write ok but XXXXXX after few time
sometime kms ok sometime XXXXX
restore back up and ok
how doing with this dash?
thanks

[gijsvm]

Hi,
tried ford fiesta 2019
Read ok write ok but XXXXXX after few time
sometime kms ok sometime XXXXX
restore back up and ok
how doing with this dash?
thanks

Probably because you write it with the wrong software license. You need FD0021 for it.

[esse]

Probably because you write it with the wrong software license. You need FD0021 for it.
hi,
yes i tried with FD0021

[Manuelgb]

[QUOTE = gijsvm; 3667910] Abra el programa uhds, haga clic en "Ayuda" y el software le mostrará una imagen de cómo conectar uhds en el banco al ecu. [/ QUOTE]


PEUGEOT 407 BSI JC full obd, ecu full sid 803 obd eeprom mpc y flash obd

[brend]

Renault Scenic (4) 2017.

Dash.
Read km ok.
Read eep/flash ok. (flash read 25 min)
Write new km ok.

Abs (ATE)
Read eep ok.
Read km ok.
Write new km ok.

[KADE007]

Hi to all
someone have any experience with mode learn key on FORD CMAX year 2012 KEYLESS ?
Thanks.

[brend]

All key in here..........

https://www.digital-kaos.co.uk/forums/forumdisplay.php/177-Locksmith

Hi to all
someone have any experience with mode learn key on FORD CMAX year 2012 KEYLESS ?
Thanks.

[KADE007]

All key in here..........

https://www.digital-kaos.co.uk/forums/forumdisplay.php/177-LocksmithThank you sir, but I 'm talking about learn key function with smok uhds...

Envoyé de mon ASUS_Z00AD en utilisant Tapatalk

[peko]

ford edge & mondeo not work also ;)

[solomaxe]

hi! i need do iveco 2019 with smok i buy option but not fonctionne!! the dashboard 24c16 and the body 25320 please help

[peko]

hi! i need do iveco 2019 with smok i buy option but not fonctionne!! the dashboard 24c16 and the body 25320 please help

yes no work bcm version after 2015 ;)
you must buy option from enigma and work like charm ;)

[solomaxe]

pls i reed bcm and dashbord with upa i need 9700 km pls pls pls my freind

[Mamador]

Just Done Talisman 2018
Turn the engine ON


1st ABS (5min max) read then write
Dash
1st I tried to read flash through Visteon. It turned off, refused.
Then I read through Continental high and it works.
When Writing, you have to do it twice .
Around 30min to read and 30min to write.

Cheers.

[abdallah]

hello
please golf 7 JC works perfect with smok ?
any idea?
thanks

[Mamador]

Renault Scenic (4) 2017.

Dash.
Read km ok.
Read eep/flash ok. (flash read 25 min)
Write new km ok.

Abs (ATE)
Read eep ok.
Read km ok.
Write new km ok.

Hi. Thanks for the info.
It was VISTEON or CONTI high or low for the dash ?

[offsystem]

I need change language of V70 2016 from cluster to German, does smok also have flash files for clusters?

[brend]

Ask this from smok autor!


I need change language of V70 2016 from cluster to German, does smok also have flash files for clusters?

[Nicolas9]

hi guys.

does the trafic 2018 still has same issues like clio4: gives incorrect information about trip average consumption, how many km's left to drive with current gastank, on the lcd screen in dash?
(this happens when you block abs in clio4).

thnx.

[honingkoning]

Guys what is your succes rate smok v/s new mb like W176 etc.
I have max 1 out of 10 W176 always unlock error.
I know a 2016/2017 is always dash out but the oldest W176 also can't unlock by OBD.

What is a good tool for newer Mb.

A en B can be done by eep but for w205 no option with smok.

Wbr Adam.

[teerak2uk]

Guys what is your succes rate smok v/s new mb like W176 etc.
I have max 1 out of 10 W176 always unlock error.
I know a 2016/2017 is always dash out but the oldest W176 also can't unlock by OBD.

What is a good tool for newer Mb.

A en B can be done by eep but for w205 no option with smok.

Wbr Adam.W205 is ms0006

[gogo660tc]

hello, someone has tested the smok 35080v programmer in the bmw 2016 35160wt eeprom.

[keturi]

W205 is ms0006
After 2014.06 W205 and W222 doesn't work, tested, no answer from support.

[kizagt]

hello
please golf 7 JC works perfect with smok ?
any idea?
thanks

work good but for some version of jc still dont have solution by smok or any other tools

[javyb]

After 2014.06 W205 and W222 doesn't work, tested, no answer from support.Because it needs mcu downgrade in order to correct the mileage

Sent from my SM-N960F using Tapatalk

[Jamaly]

Used smok to do kn on transit custom 2016 changes dash fine but still stored in pcm

[Stefanomilano]

I try today with filter he says can do I install a can filter rh in ezs but I can not communicate with any box in the car w205 glc253 2018
its possible now ki virgin dp4 for downgrad but why with smok filter rh no longer communicates

[Nicolas9]

smok vw JC mqb works only for 2013/2014? no 2016?

[honingkoning]

Because it needs mcu downgrade in order to correct the mileage

Sent from my SM-N960F using TapatalkHow and what tool can do that

[javyb]

How and what tool can do thatDiagprog 4

Sent from my SM-N960F using Tapatalk

[honingkoning]

Diagprog 4

Sent from my SM-N960F using TapatalkOnly solution is diag prog?

[Team dz]

yes golf 7 jc gtd 2017
works perfect with smok ?