Problem Nissan Pathfinder Lost key

[samranisimo]

Hi guys
i have problem with nissan pathfinder 2007 lost key
i prepared a new chip and new key with abrites original and tango original but the problem is the car work but after afew minutes when i try to start the car again doesn’t work at all or when deconect the battery and reconnect it ,so please if you know how to fix the problem help me

Best regard

[samranisimo]

I want to know why the immobilizer forget the code pin BCM

[klaudio]

I want to know why the immobilizer forget the code pin BCM

I was doing a nissan almera with id46, same symptoms it will start a few times then after a minute or two nothing until got id60 transponder programmed, worked like a charm. Maybe that's the problem, try and report.



NISSAN
PATHFINDER
1999
2004
Transponder TEXAS Crypto 4D ● ID 4D60 ● JMA : TP19, TPX2


NISSAN
PATHFINDER
2005

Transponder Philips Crypto 2 ● ID46 ● Original key with PCF7946A

[samranisimo]

I was doing a nissan almera with id46, same symptoms it will start a few times then after a minute or two nothing until got id60 transponder programmed, worked like a charm. Maybe that's the problem, try and report.



NISSAN
PATHFINDER
1999
2004
Transponder TEXAS Crypto 4D ● ID 4D60 ● JMA : TP19, TPX2


NISSAN
PATHFINDER
2005

Transponder Philips Crypto 2 ● ID46 ● Original key with PCF7946A




I used 3 of my chip pcf7936 cause the car model is 2007 . like you said it start a few minute then after i turn the ignition off for some minutes, it the stop working

i will try another chip and i will reply you

[klaudio]

Do you have the vin#?

[samranisimo]

yes i have vin car ....

[klaudio]

yes i have vin car ....

what's the vin#, i'm trying to see if I can identify the transponder type.

[samranisimo]

VSKJVWR51Z0209873

[dooshan]

it's 46 allright but...bad module? from my angle,every car that had trouble 'saving' keys tru obd,it was with bad modules...most of them i've managed with bench work.
so why dont try manualy?

[samranisimo]

How can i do it manually ?

[dooshan]

can you read it on table and produce image file to write it back?

[samranisimo]

I read it on table but it work but for a few minute forget the code. And the car doesn’t start

[dooshan]

witch tool do you use for precoding pcf7936? can you post dump maybe?

[samranisimo]

I use abrites and also use tango

[dooshan]

post dump friend

[samranisimo]

this is the file 93c66 eprome original ,VVDI and tango