MJD8F kess 2.23 via OBD ?

[fzhut]

Hi,

Im going to do this car (2010 fiat panda 1.3 mjt 75 DPF). Kess 2.23 have this protocol. Is it safe to read this ecu with EU clone and write via OBD ?

Regards,
Mateusz

[lsdlsd88]

as with every clone, theres always a risk. but should be fine ;)

[fzhut]

Any people tried ?

[lsdlsd88]

Done loads successfully..

[sdtsedat]

My friend brick this ecu with kess clone 2.23 v5.017

Geniune tool do this without problem.
Regards from Belgium,

Verstuurd vanaf mijn SM-G955F met Tapatalk

[TuningInside83]

MJD8F2 read and written without problems

[dudus8]

MPPS can read and write this ECU no problem

Wysłane z mojego SM-G965F przy użyciu Tapatalka

[Panathaole]

MPPS can read and write this ECU no problem

Wysłane z mojego SM-G965F przy użyciu Tapatalka

i have true eu mpps v18 clone ... can full read but i think write only eeprom.. not flash...

[huskypt]

Hi fzhut

Can you read and write this ECU with your tool?





Hi,

Im going to do this car (2010 fiat panda 1.3 mjt 75 DPF). Kess 2.23 have this protocol. Is it safe to read this ecu with EU clone and write via OBD ?

Regards,
Mateusz

[tiugrikas]

Hi fzhut

Can you read and write this ECU with your tool? use mpps v18 works perfect and super fast

[immokill]

I use galleto work fine on 8f2 dont now on 8f3 mate

look here bro

http://www.digital-kaos.co.uk/forums/showthread.php/679679-problem-kess-and-ecu-marelli-mjd8F3?p=3344778&viewfull=1#post3344778

8f2 is tested bu me 8f3 i dont know

[rh03]

mjd8df ok for me with eu mpps v18, eu and genuine mpps have good réputation on marelli ecu

[huskypt]

Today i tested for 8F3 (KESS).... write ok but maybe checksum failed (DTC P060c).... wrote ORI ...

[huskypt]

I tried but without sucess with Galletto.


I use galleto work fine on 8f2 dont now on 8f3 mate

look here bro

http://www.digital-kaos.co.uk/forums/showthread.php/679679-problem-kess-and-ecu-marelli-mjd8F3?p=3344778&viewfull=1#post3344778

8f2 is tested bu me 8f3 i dont know

[silan66]

Today i tested for 8F3 (KESS).... write ok but maybe checksum failed (DTC P060c).... wrote ORI ...

did fiat ducato 8f3, crc rules in winols, the recording is over, auto rides. (without editing the checksums of the car, do not start) upload the read file, fix crc and start the machine (kess clone)

[Corsaro]

Today i tested for 8F3 (KESS).... write ok but maybe checksum failed (DTC P060c).... wrote ORI ...
was the original file rewritten in recovery mode?

[markofi]

scusa ho una centralina 8f3 programmata con kess e la macchina non mi parte piu se scrivo il file originale in modalita ripristino cosa succede?

[pack3r]

can confirm, i did 3 Ducato 2.3 2015yr Marelli 8F3 in past 2 days with Kess 5.017 by OBD without any problem.