Zenec zc-nc2011d

[jackie86]

Hi guys.
This unit is stucked on logo.. can someone help with this? Need recovery firmware files..
https://uploads.tapatalk-cdn.com/20190102/a012afcbaaf13bf8c4a7477cbc9adcb3.jpg


Sent from my iPhone using Tapatalk

[neutec]

Try this firmware to save it, good luck.


https://wetransfer.com/downloads/d3a6a3333f245335b3983b5648b48e1e20190102160041/586646fc71e032e411ade4100a76c6e420190102160041/611dfd

[jackie86]

Try this firmware to save it, good luck.


https://wetransfer.com/downloads/d3a6a3333f245335b3983b5648b48e1e20190102160041/586646fc71e032e411ade4100a76c6e420190102160041/611dfd

Thank you. Is this bin file for flash or recovery files for usb/sd card? (Dont have PC now to view type of file).



Sent from my iPhone using Tapatalk

[neutec]

Extract ZE-NC2011D_V0403_FEU_Update.exe, copy C9_SW_Update to the root of SD OR USB boot, turn on the RADIO more instructions in pdf.

[jackie86]

Extract ZE-NC2011D_V0403_FEU_Update.exe, copy C9_SW_Update to the usb root, boot usb more instructions in pdf.

I will try it, but i think that you files is for unit that can boot operaring system, than go to settings-update... i am not able to do that becouse is stucked on logo.. :(
Anyway, i will try tomorrow. Thank you


Sent from my iPhone using Tapatalk

[razvanrms]

dezarhivați fișierul ZE-NC2011D_V0403_FEU_Update pe o cartelă SD mai mare de 2 GB, formatată în grăsime32, cardul SD va găsi un fișier numit C9_SW_Update, introduceți cardul în slotul navei și re~~~~iți-l. sigla apare timp de 5unzip the ZE-NC2011D_V0403_FEU_Update file on a sd card larger than 2GB, formatted in fat32 the SD card will find a file named C9_SW_Update, insert the card into the ship's slot and restart.

the logo appears for 55 seconds, then a window appears,5 de secunde, apoi apare o fereastră de
dezarhivare a fișierului ZE-NC2011D_V0403_FEU_Update pe o cartelă SD mai mare de 2 GB, formată în grăsime32, cardul SD va găsi un fișier numit C9_SW_Update, introduceți cardul în slotul navei și re~~~~iți-l. sigla apare timp de 55 de secunde, apoi apare o fereastră

[jackie86]

i have tried to extract downloaded file to root of sd, but NO, it cant be done this way.. need recovery files, this is files for updating when unit boot up operating system..

[jackie86]

hi friends.. i still didnt solvemy problem with this unit..
i have readed flash en29lv160 cb...
does someon of you have dump for this flash, for this unit??

[multimesut]

Hello. Did you find a solution? I have that same problem. I couldn't figure it out.

[jackie86]

Hello. Did you find a solution? I have that same problem. I couldn't figure it out.

No friend, i’ve returned unit to custumer :(


Sent from my iPhone using Tapatalk

[multimesut]

Hello friend. my unit has been standing in this way for 6 months. couldn't find any solution :(

[jackie86]

Same story, i have returned 3 unit in last 6 months


Sent from my iPhone using Tapatalk

[multimesut]

I am very surprised that there is no solution at all. I talked to the firm. says the firm needs to change the card. Get a new device to do it. very expensive. I think it is ridiculous. software problem.

[brecht77]

So how did you solve this problem?

[brecht77]

Have you found a solution to this problem?

[Walter2011]

Hi friend you found solution?? I have same problem with 2 units NC2011D Zenec... show only logo and restart..
I tried update.. all.solution with firmware..not worked.

[Walter2011]

Solved!
The problem is hardware.Not firmware!:hahaha: It is general problem with NC 2011D....

[A3fDevil666]

U know witch Hardware ?

[mg45]

Hi friends, I have the same problem with ZE-NC3811D Only the zenec logo
I tried updating .. all.solution with firmware .. not working.
I replaced the new programmed flash and then the same. PCB ZE-NC3811D = ZE-NC 2011D Request for some tips

[srgean832]

help me with this file

[srgean832]

you can explain what it was ?
TK

[waldi]

I have the same problem in model 3811D, does anyone have a solution ??

[arık]

what can be solutıon wıth hardware ??

[csgultekin]

I think the problem is not with c(f)eon en29lv160cb, but with sandisk SDIN7DP2-8G, but I don't have the necessary adapter to flash it with rt809h, therefore cannot prove I'm right. Nevertheless I'm adding the original firmware I read from the en29lv160cb.

[audiopoint]

from witch Zenec model is dump

[Walter2011]

I can solved this but must need send me the unit...

[salcek]

I think the problem is not with c(f)eon en29lv160cb, but with sandisk SDIN7DP2-8G, but I don't have the necessary adapter to flash it with rt809h, therefore cannot prove I'm right. Nevertheless I'm adding the original firmware I read from the en29lv160cb.
I want to download this file but it says you are not authorized, what should I do?

[salcek]

thaaaaaaannnnkkkkss:neşe:

[csgultekin]

from witch Zenec model is dump
It is from NC-2011D.

however what you need is not this, taking out the chip and flashing it back, will not save your unit. I have now verified that the problem is indeed sandisk mmc chip, I am now looking for the whole OS files, and if I can find them I will flash, and probably resurrect the unit.

[bahapmk]

Today I have the same problem. It stucks on the logo. I can only hear the radio but I can't change anything. Is there any solution?

[Decode Ghost]

Today I have the same problem. It stucks on the logo. I can only hear the radio but I can't change anything. Is there any solution?
hi,
LOOK here...........
http://www.zenec.com.tr/guncelleme2011D.php

[bahapmk]

Thank you. Is it possible to apply this in my current situation? I mean, my device is stucked on the logo and I can't reach any menu. So, it must be installed automatically during the boot I think.

[Decode Ghost]

Thank you. Is it possible to apply this in my current situation? I mean, my device is stucked on the logo and I can't reach any menu. So, it must be installed automatically during the boot I think.
friend I don't understand how can I help you further Follow the instructions

[bahapmk]

Unfortunately, I couldn't solve this problem with this way. Is there any other suggestion?

[xisp1971]

Good day everyone!There is a ZENEC ZE-NC2011D the problem is that it hung on the logo, I tried updating the response to zero.After that, I removed it from the Emmc-SDIN7DP2-8G module, which I tried to read but to no avail, the memory died. I ask for your help in finding Full Dump. Maybe someone copied his own, possibly non-working.With respect to you!

[Jaca77]

Hi All!
The cause is the Sandisk iNand. I drop out, and insert a nandFlash with Clarion NX501, that has same daughterboard, set two resistor to boot from nand, and it work. Not full, eg BT audio not work, but BT phone is fine. Navi work from SD card. The tone control is intresting.

[Desperado01]

deneyelim bakalim

[Mankyro]

deneyelim bakalim
Use English only here

[Desperado01]

Use English only here

ok. thanks