Audi Dash RB8 not work

[Perryking]

Hi, I have exactly the same problem like in this thread:

https://www.digital-kaos.co.uk/forums/showthread.php/357091-Audi-RB4-dash-8E0920930J-problem-after-battery-replacement?highlight=audi+rb8

How can I solve the problem? Read 24C08 and post here??

Thanks

[Jancis]

Yes, post your dump

[Perryking]

This is eeprom, please I need solution for this dash.

8E0 920 930 R

Thanks

[brend]

If put test dash vcds away ,needles work?

[Perryking]

Needles not work in car, in bench yes. Illumination not work in car.

Error 00576 KL15.

Green connecor ok, possitive and gnd.

[dominik.m]

Your dump is corrupt. Try this file.

[Perryking]

Thanks I´ll try and report here.

[marina_rv]

dominik.m (https://www.digital-kaos.co.uk/forums/member.php/58019-dominik-m) - please help my.

DEF problem

Thx.

[dominik.m]

dominik.m (https://www.digital-kaos.co.uk/forums/member.php/58019-dominik-m) - please help my.

DEF problem

Thx.

Have you tried to change the value? Is the cause different?

[Perryking]

With your dump dash not power up and car doesn´t start.

Please any other solution?

[dominik.m]

I do not want to believe, but ok.
Another solution is this.
Read the coding with VCDS and save.
From your ori file you have to read the immo data and save. Carprog, for example with OBD.
Then write another checked file from the dash with the same HW.
Next . Write ori immo data and ori coding.

[Perryking]

I´ll check eeprom tomorrow, maybe bad solder.

[Perryking]

I manage to power up the dash but still same problem, oil pressure and no needles and illumination. Problem is in flash, but I dont have the tool for repair this dash.