Mini CAS3+ need check dumps

[lion0304]

Hi

I have a CAS3+ mini 61.35 - 9221719-01 that i need check Flash if it is correct and good with this CAS number.


Thanks in advance.

[droidwayne65]

Don't have another flash with which to compare but it's part number matches the label. On the other hand, eeprom is screwed.

[lion0304]

Yes i see eeprom in boot mode and have already repaired.

I'll write ONLY eeprom and try. Thank you for your advise.

[p1et]

What's the reason of CAS being in boot mode? Did you try to downgrade CAS or what?

[lion0304]

What's the reason of CAS being in boot mode? Did you try to downgrade CAS or what?

I have no idea, a friend garage bring me this Cas3 and said CAS doesn't work.

He also give another CAS order dealer but with another part number, diffrent MCU 0M23S. In this CAS 2 keys: 1: 7936 and other 7946.

[koolstuff]

Here is a complete Set with your CAS3 + and ECU Full Dump

[koolstuff]

Make Key with tango using eprom of ecu dump and start car, but you'll have to sync EGS ans ELV, CGDI or FVDI or Maxisyscan do it

[lion0304]

Make Key with tango using eprom of ecu dump and start car, but you'll have to sync EGS ans ELV, CGDI or FVDI or Maxisyscan do it

Thank you mate, i'll need only good flash, because car still has working key.

[lion0304]

Here is a complete Set with your CAS3 + and ECU Full Dump

With your good Flash dump, i just compare with mine and flash is the same.

So i just write eeprom repaired and hope everything will go fine.

[lion0304]

Update my case: Write good eeprom and flash, mount on car. No igntion, no ELV....only wiper work.

I use the doner CAS with 0M23S, make new key and car start now. So original CAS hardware is completely dead.

[sidtronik]

hello need pass thanks

[stonerock]

hi, can i get pass pls. thanks

[uzman33]

password please!!!!!

[uzman33]

Here is a complete Set with your CAS3 + and ECU Full Dump
password please!!!!!!!!!!!