View Full Version : Corrupted EEPROM on EZS audi
bauvaisis
30th June, 2019, 01:16 PM
Hi guys, after trying to read out a pin code with FVDI , same problem as usual, car lost all power , no ignition anymore and no com with module 5 EZS. Tried pulling fuse, reboot with battery off but nothing. I removed the module from the car , read the MCU flash + eeprom with XPROG . Flash seems to be OK, but eeprom seems to be corrupted !? Even the VIN isn't complete when opening the dump as if some bytes have changed ? I've seen a topic on this forum where in the eeprom bytes have been swapped around ... It isn't really my case but something happened ...
Car VIN : WAU ZZZ 4F97N001643
Any pros about this topic that could give me a hand on this ?
I've posted my flash + eeprom read out with XPROG.
have a nice day !
jaromib
30th June, 2019, 01:39 PM
Hi !
Try other older flash under sw130. I think your is above sw180
Regards
bauvaisis
30th June, 2019, 01:58 PM
my flash is SW 2.10 ! you think this can change something ?? when i post eeprom dump on tag key tool with FVDI, it isn't recognized ...
jaromib
30th June, 2019, 02:04 PM
I was same problem, after change flash car started again.
jaromib
30th June, 2019, 02:06 PM
I was same problem, after change flash car started again.
https://www.digital-kaos.co.uk/forums/showthread.php/582880-Q7-2015-Kessy-Dead-after-read-pin?p=3305850#post3305850
bauvaisis
30th June, 2019, 02:17 PM
thanks for your answer ! I have exactly same HW, SW and MCU mask as you ! do you still have the flash you used ??? thanks ;)
bauvaisis
30th June, 2019, 02:18 PM
i opened your eep with TAG tool , and i can read 3 keys programmed , but my EEP is corrupted! i will start by solving this first ;)
bauvaisis
30th June, 2019, 04:21 PM
or if anyone can calculate checksums on this kind of MCU internal EEPROM ? because i can do the rest manually : keys, pin, VIN etc ;) thanks
qeso705
30th June, 2019, 06:36 PM
There is no cks. Follow advices from jaromib.
bauvaisis
6th July, 2019, 07:03 AM
hi guys, just for an update, i managed to get the car working again thanks to Bobble's precious help :) eeprom and flash were corrupted. But now car is in component protection mode. Got to find a solution ! thanks :) I saw that ODIS online car do this, but it will be tricky to find someone with access .
p1et
6th July, 2019, 02:16 PM
Never touch Audi A6 C6 / Q7 with FVDI
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.