Dead Citroën Jumpy/ expert after pin read with FVDI

[razzyb]

Hi I am looking for flash for Peugeot expert/Fiat scudo / Citroen Jumpy 2011 JCI flash 4401 . car is dead after pin read with FVDI. i am getting checksum error with current file. car is dead. any help much appreciated. Thanks<br>Functional plan no&nbsp; 9664058780<br>software ref&nbsp; &nbsp;9601451680<br>manufacture 17/08/2008<br>flash type 4401

[rafal]

why double thread??????????
https://www.digital-kaos.co.uk/forums/showthread.php/783264-Dead-Citro%C3%ABn-Jumpy-expert-after-pin-read-with-FVDI

read and post sw signature.............

[razzyb]

i dont know if it correct one because i read it after the car is dead... signature 44.01 thanks for your help Rafal

sorry i may have posted twice by mistake

[rafal]

today is your lucky day..........
here

[thayer201]

i dont know if it correct one because i read it after the car is dead... signature 44.01 thanks for your help Rafal

sorry i may have posted twice by mistake


look here : https://www.digital-kaos.co.uk/forums/showthread.php/456949-CITRO-NN-PICASSO-2009-BSI-FLASH-PROBLEM?p=2492530&viewfull=1

post 30....

rafal beat me to it :)

[razzyb]

Hi, Thayer201 i have tried post 30 file today. it has same checksum error as soon as i load it into FVDI. thanks for your response Sir

[razzyb]

Thanks for the file

[rafal]

Thanks for the file

press buttons........

[razzyb]

car is live now. but still doesnt start few fault permanent fault codes in engine ECU and BSI
ECU status learnt
but it say waiting for BSI response
codes on ECU D118 , !693. E001. 0692

Vin was missing from BSI. so i added the VIN
Engine type in BSI unknown
BSI fault codes , B403, A4A1, F4BA, A4D4, F5FF, FA4A, FA58

their 3 possibilities. either flash is still not the right one or BSI need synchronization or BSI eeprom is corrupted. Thanks

[thayer201]

car is live now. but still doesnt start few fault permanent fault codes in engine ECU and BSI
ECU status learnt
but it say waiting for BSI response
codes on ECU D118 , !693. E001. 0692

Vin was missing from BSI. so i added the VIN
Engine type in BSI unknown
BSI fault codes , B403, A4A1, F4BA, A4D4, F5FF, FA4A, FA58

their 3 possibilities. either flash is still not the right one or BSI need synchronization or BSI eeprom is corrupted. Thanks

Post your files ill take a look...

[razzyb]

here is flash after car died and current eeprom. Thanks

[razzyb]

here i full story. after initial pin read attempt checksum was corrupt. car was dead.
i identfy the BSI module as 44.01.

i had file backup from different fiat scudo which is 55FC. i uploaded that file in attempt to get the car going. car was live but didnt start.

after i uploaded Rafals file. car is still live but no start.

i think flash file with 55FC may have damaged the eeprom. I am not an expert in PSA.

if you could help me to get the car going. I can offer $50 AUD by paypal. Thanks for your help again

[razzyb]

663690663691

[rafal]

post ecu info....................

[razzyb]

Hi Rafal and Boys,


I tried to read the ECU data in car byOBD. No success
so went and bought cluster, BSI and ECUfrom same year doner car.


Now I am struggling to change mileageon new BSI


fault with old bsi is confirmed thatwrong flash had altered the eeprom.
I read the eeprom file from new BSI.Put it in Tango. It worked with 2 keys and pincode showing. Where oldBSI file wasnt accepted by tango.


Your supplied flash worked. As I triedto change mileage with FVDI again reflashing damaged the Checksum.And restored the file all worked fine.
I use the online carprog website fromLithuania to change mileage on BSI 95128 eeprom. Donner mileage is411560 and it was showing 411557.
so went ahead paid 10 euros. Got newfile into BSI. And milage is still same. And reading milage with FVDIby OBD is still 411560.


so absolutely mileage is at differentlocation then carprogonline.com change the data.
I send email to Pauline at carprog. Butno reply for last 3 days


I bought tokens to tachsoft. Stilltachosoft showing milage 411557. so it will be waste of money if I gohead.
I tried OBDstar, no luck
tried hex editor to locate the data. Itseem encrypted to me( I could be wrong) .


Now I am out of options.


Doner BSI file and carprog modifiedfile attached.


If you guys could help. Would be great.


thanks

[rafal]

what mileage you need?

[razzyb]

is there any tool that i can buy do it by OBD etc?

[razzyb]

milage required 178822. anything below 180K. Thanks Rafal for your quick response

[rafal]

............................
you will need to do same in dash

[razzyb]

I will send you cluster file tomorrow. if successful. please send me your paypal and reimbursement amount. I know you are doing it for free as help. as you do it for many people. I applicate your help so much. i just feel i should pay for it. Thanks Rafal

[rafal]

I will send you cluster file tomorrow. if successful. please send me your paypal and reimbursement amount. I know you are doing it for free as help. as you do it for many people. I applicate your help so much. i just feel i should pay for it. Thanks Rafal

dk forum is for free help...............
if more people will help other - our planet will be look better
press buttons................

[razzyb]

dk forum is for free help...............
if more people will help other - our planet will be look better
press buttons................
very true indeed sir

here is cluster file

Thank you

[hackero]

Please password to the file JCI_BSI_4401