PDA

View Full Version : Vectra C 2002



Andr33iy98
31st October, 2019, 10:56 PM
hi
I am dealing with a vectra c from 2002 y20dth engine, car did not start, just a weird yellow badge and got a lot of errors, I think that is IMMO, also remote control not working when I open/close the car. Reveloprog is the cheapest solution to retrieve immo pin from my cluster ? if I buy an donor Immo can I breed it with my ecu using opcom ? Also key learning and chip programming can be done for this car using opcom ?

bank
31st October, 2019, 11:02 PM
Vectyra C works with CIM. but not Immo.
Immo is a part of CIM in Vectra C.
Go to car repair station to solve problem.
Also, Delphi is not so good for Opel.
Use OPcom, Tech2 or MDI

Andr33iy98
31st October, 2019, 11:49 PM
I own opcom 1.99, so I need to change Cim to work ? I cannot just buy immo from a donor car ?
Do you have some programming procedures ?
With carprog 8.21 can I save a dump of immo to find out the pin ?

danielif
1st November, 2019, 11:04 AM
Hi. Vectra C from 2002 y20dth engine have Pump PSG16. With CarProg you can find PIN code by OBD CAN comunicacion.
Regards.

Andr33iy98
1st November, 2019, 11:52 AM
Cim does not have another pin ?

bank
1st November, 2019, 04:38 PM
Cim does not have another pin ?
original CIM have the same CIM as original ECU
CIM from donor will have another pin

Andr33iy98
1st November, 2019, 10:44 PM
Carprog 8.21 can do this ? Read pin from psg16 ? It is all I need ? Should I buy CIM+Donor transponders or just CIM ? If I use opcom can I get this work done ?

Andr33iy98
2nd November, 2019, 03:53 PM
Do you have a tutorial ?

Andr33iy98
5th November, 2019, 04:48 PM
And how to find Pin code for donor CIM ?

Reveprog can do this ? I own just carprog and opcom

brend
5th November, 2019, 04:54 PM
2 sulutions for this.

1.read and load dump!...from dump 100% correct pin!!!
2.read from donor cim obd2 away vin and diller,but if vin is changed in donor cim pin from diller not work?

So....choose!!!


And how to find Pin code for donor CIM ?

Reveprog can do this ? I own just carprog and opcom

Andr33iy98
5th November, 2019, 06:11 PM
So Reveloprog can do this dump read ? i DO NOT GET IT at point 2, what is diller ?

Andr33iy98
5th November, 2019, 06:13 PM
2 sulutions for this.

1.read and load dump!...from dump 100% correct pin!!!
2.read from donor cim obd2 away vin and diller,but if vin is changed in donor cim pin from diller not work?

So....choose!!!
Caprog can do this via 0BD ?

brend
5th November, 2019, 06:14 PM
All simpel....664559


It's mean when you get from cim obd2 away vin and with this vin drive to diller for get login vin away!!!


So Reveloprog can do this dump read ? i DO NOT GET IT at point 2, what is diller ?

Open cim look what in side and check options in reveloprog ,only that's away you can know!!!

Andr33iy98
5th November, 2019, 09:13 PM
Still do not get it

rafal
5th November, 2019, 09:24 PM
Still do not get it

Give this car for someone who will know what to do....1 hour of job and car will come back on the road

Andr33iy98
6th November, 2019, 08:20 PM
Give this car for someone who will know what to do....1 hour of job and car will come back on the road

Why not explain to me ? I am bad at english, easy words