Audi 8k0959754D keyless go unlock - lost keyless Keydiy

[sdnatlst]

Hi all
So unlocked this with keydiy

Used correct 7945ac2319 version file

Key now shows unlocked but not keyless on vvdi2

Before unlock showed as keyless key but locked.


Any ideas ? See photo

[qeso705]

It dosent show keyless and keyless dont work too? In worsest case flash it with diffrent fw. Vvdi probably recognize it only from text in key eeprom.

[sdnatlst]

I havnt tried on car yet

Because I got this free from keyless audi a4

First it showed keyless on vvdi 2 locked

So I unlocked and now says not keyless unlocked

[Manta1600]

Please upload picture of your PCB and tell what files used from KD - there is few versions

[sdnatlst]

PCB is 7945ac2319 TP type

Used correct V9 version 7945ac2319 on KEYDIY

[p1et]

Did you try programming it on car? I have exactly same part numbers PCB unlocked by keydiy and I will have car tomorrow to program but now I'm not sure if this will work. They added V9 version 7945ac2319a just in the end of October so it's kinda new.

[p1et]

Sorry double post

[sdnatlst]

Hi no I didn't sorry

Is your car keyless go? Can you let me know result.
I still have key in stock

[p1et]

Yes car is with keyless. I think something is wrong with this unlock file because now when I put this unlocked key by kdx2 close to kdx2 antennna to check remote signal, it send signal without pressing buttons for a short while and the other keyless go fobs which I have unlocked by different device do not behave like that. I think I'm not gonna test it on car as it's only 1 fob I have (315MHz keyless) and I will ask friend to unlock it for me with 'PCF programmer'

[Manta1600]

Yes car is with keyless. I think something is wrong with this unlock file because now when I put this unlocked key by kdx2 close to kdx2 antennna to check remote signal, it send signal without pressing buttons for a short while and the other keyless go fobs which I have unlocked by different device do not behave like that. I think I'm not gonna test it on car as it's only 1 fob I have (315MHz keyless) and I will ask friend to unlock it for me with 'PCF programmer'


I have the same problem LED blink without press the buttons

I tought that seller send me faulty key because when I received the key battery was flat

[p1et]

I have the same problem LED blink without press the buttons

I tought that seller send me faulty key because when I received the key battery was flat

He sent you genuine already renewed key?

[Manta1600]

Sorry Plet just saw your question

No he sent me used locked key but with flat battery inside - I unlocked with Barracuda and putted new battery and the key started to blink time to time

I wasn't sure if the key is faulty or file is bad so I ordered another 2 used keys - after renew they also blinked

After that I tried with all versions on Baracuda and only with V6 after reflash key looks OK

but today I tried to program key on A7 without success - VVDI show that key is Deler key but car cant recognise the keys - Tried also Autel the same result with all 3 keys

so now must findh the right flash files for these keys

[HeXeN]

Any new info about unlocking 8T0959754K ?