View Full Version : opcom corsa 1.3 2011 ECU
sdnatlst
14th July, 2020, 08:23 PM
will opcom program 1.3 diesel ECU into the car OK?
I have pin code from DONOR ECU
and will pull pin from the cluster on the car.
So virginise new ECU with NEW ECU pin with opcom
Then program new ECU with cars original PIN with opcom
Anything further that will need coding/syncing?
yokazik
14th July, 2020, 08:28 PM
check ecu coding. transmision abs type of airco clutch or valve
wembleyhill
14th July, 2020, 08:28 PM
hi as long as you have pin for car and donor shoud be no problem i done before
sdnatlst
14th July, 2020, 08:40 PM
check ecu coding. transmision abs type of airco clutch or valve
it is matching HW and SW number ECU, hope it should be a match?
Remaptech
14th July, 2020, 10:12 PM
Hi,
That ecu must be compatible hw and sw.
Enviado do meu Mi Note 10 Pro através do Tapatalk
12manux
17th July, 2020, 07:59 PM
Yes it will program it .Make sure to config Low Speed ,Mid speed and High speed can configuration reset old ecu instal new ecu reset it than program it with car s pin code.5 min job
PierreTheron
17th July, 2020, 09:13 PM
might need rest cluster and program again .
Reset bcm and program again
You will see the fault codes related to it in the ecu
Best Regards
sdnatlst
18th July, 2020, 06:00 PM
thanks, opcom didnt have any option to program ECU on this year :( but i cloned it on the bench and it worked fine
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.