PDA

View Full Version : VIRGIN BSI VALEO Peugeot 307 2003



carsandkeys
16th October, 2020, 05:55 PM
Hi all,

I need virgin bsi to adapt via obd with PP2000. The car crash and not start, failure in BSI. I read original eeprom 95160 and compare with donor bsi and this seem like lost data. with original BSI windows and door dont work and not start. with donor all work less start (normal with another pincode and keys). I need virgin donor BSI for adapt. Here both files. I read pincode from original BSI. is R05P but i dont know if it can be corrupted.

rafal
16th October, 2020, 06:04 PM
pin from ori: R05P
test this virgin

carsandkeys
16th October, 2020, 06:50 PM
pin from ori: R05P
test this virgin

You virgin original bsi or virgin file from another bsi? please virgin donor bsi, i think this have more posibilities.

rafal
16th October, 2020, 08:06 PM
it is from donor..................
edited: write then report ---- ok it easy answer before try - lazy man

carsandkeys
19th October, 2020, 09:22 AM
it is from donor..................
edited: write then report ---- ok it easy answer before try - lazy man

I asked first because i must take out all the pcb for read/write eeprom. I try with wires but without success. I will test the file today.

carsandkeys
19th October, 2020, 04:25 PM
I asked first because i must take out all the pcb for read/write eeprom. I try with wires but without success. I will test the file today.
With this file, the dash dark and sound relay knock knock knock. No conection with bsi

rafal
19th October, 2020, 04:36 PM
I asked first because i must take out all the pcb for read/write eeprom. I try with wires but without success. I will test the file today.

are you sure that your soldering is ok ?
--- risk operation ---

carsandkeys
19th October, 2020, 05:03 PM
are you sure that your soldering is ok ?
--- risk operation ---
Not first time i did this work, and i have a good solder station. I write donor original file and works ok! Then your file not is ok

rafal
19th October, 2020, 05:06 PM
as you said - my dump not work - fill whole dump FFFFFFF

carsandkeys
19th October, 2020, 06:06 PM
I write donor original file, change vin and learn new keys. in engine ecu change Pin via dump. No DTC but show calculator blocked. its possible immooff in ecu or sincro with the scrap bsi file?

ME.7.4.4 0 261 206 943 96 503 461 80

rafal
19th October, 2020, 06:19 PM
in ME.7.4.4 if need off - post also flash

carsandkeys
19th October, 2020, 06:35 PM
in ME.7.4.4 if need off - post also flash
Sorry mate, i know, im so bussy working in varius cars at same time. Here flash file too

rafal
19th October, 2020, 06:45 PM
here.........................

carsandkeys
19th October, 2020, 07:08 PM
here.........................
Working! car start.

rafal
19th October, 2020, 07:11 PM
that's good info..................