View Full Version : Pin from eeprom ECU neede on EDC15C7 Opel
Jashmine1983
9th May, 2021, 08:13 AM
Hi to all!
Please help with PIN code from eeprom 95080 EDC15C7 opel.
I need to swap these two ECU.
Thanks!
kiszka
9th May, 2021, 08:31 AM
Hi to all!
Please help with PIN code from eeprom 95080 EDC15C7 opel.
I need to swap these two ECU.
Thanks!
org pin 3742
scrap pin 1194
Autronico2
9th May, 2021, 12:08 PM
Hi to all!
Please help with PIN code from eeprom 95080 EDC15C7 opel.
I need to swap these two ECU.
Thanks!
Why don't you directly move the eeprom of the original ecu in the used ecu, so you also transfer the original pin code.
kiszka
9th May, 2021, 12:14 PM
Why don't you directly move the eeprom of the original ecu in the used ecu, so you also transfer the original pin code.
because these are not identical ECUs, this is what only an amateur does with this car
when programming takes 15 minutes and is a 100% certainty
Autronico2
9th May, 2021, 03:39 PM
because these are not identical ECUs, this is what only an amateur does with this car
when programming takes 15 minutes and is a 100% certainty
A ok, I have not downloaded the files, I did not understand that the ecu were different. :top:
Jashmine1983
10th May, 2021, 08:15 PM
because these are not identical ECUs, this is what only an amateur does with this car
when programming takes 15 minutes and is a 100% certainty
The ECUs are the same....I've tried to reset ECU with OPCOM but it does not work..... the PIN CODES are good.
When I enter the one from scrap on car it says "please wait", and freeze...I've also tested with power source on car.
I'm going to swap eeprom ans see what happens.
kiszka
10th May, 2021, 10:17 PM
The ECUs are the same....I've tried to reset ECU with OPCOM but it does not work..... the PIN CODES are good.
When I enter the one from scrap on car it says "please wait", and freeze...I've also tested with power source on car.
I'm going to swap eeprom ans see what happens.
my friend, the numbers don't lie, written in eeprom
See what is the time delay of the ecu
Jashmine1983
14th May, 2021, 02:23 PM
my friend, the numbers don't lie, written in eeprom
See what is the time delay of the ecu
Swaped eeprom and worked....thanks!
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.