PDA

View Full Version : 520d G30 SCR off on MD1


atomiczen
24th December, 2021, 09:41 AM
I need help disable scr on a bmw 2018 G30 520d with bosch md1cs001 ecu
i tried 2 swiftec solutions with no luck, car don't start anymore with no more km available on dash.
Is there here someone have working solution? i know bitbox and some other have solution for this. I don't know if someone have tested with success that
here ori file
Blabla76
24th December, 2021, 09:53 AM
You need professional help.
;)
It is not always worth writing a file
pike
24th December, 2021, 10:21 AM
Hi,

with original file start ok?
AKH84
24th December, 2021, 11:14 AM
Hi,
try my file and report
KIMICE93
24th December, 2021, 01:55 PM
hello

pass in pm, TRY AND REPORT please
JPerformance
24th December, 2021, 04:48 PM
I dont understand why all post file with "try and report".
atomiczen
27th December, 2021, 12:42 AM
I dont understand why all post file with "try and report".
probably because solution is new and a lot need to test solutions, and it's not simple to have a car to test without the customer that break the ball at phone.
atomiczen
27th December, 2021, 12:46 AM
Hi,
try my file and report


hello

pass in pm, TRY AND REPORT please

both made same file. I let you know tomorrow
eggystar
27th December, 2021, 08:27 AM
RESET ALL SERVICES , OIL , EMISSIONS etc , Car will cranking , If not i have tested manual solution
atomiczen
29th December, 2021, 11:23 PM
Hi,
try my file and report

file seems work, 2 days without adblue warning, stranger things is 2 errors appear after driving test that never seen before
274000 fuel temp sensor and 284400 exh gas temp
removed dtc and car still working (is a taxi)
pike
30th December, 2021, 10:35 AM
file seems work, 2 days without adblue warning, stranger things is 2 errors appear after driving test that never seen before
274000 fuel temp sensor and 284400 exh gas temp
removed dtc and car still working (is a taxi)

it can't work
atomiczen
11th January, 2022, 12:34 AM
it can't work
you are right, it don't work
still adblue countdown
Lambda1
11th January, 2022, 08:59 AM
because swiftec and other automatic solutions dont work...
You need a manual one. Nobody will do this as freeloader job.
atomiczen
13th January, 2022, 03:57 PM
because swiftec and other automatic solutions dont work...
You need a manual one. Nobody will do this as freeloader job.
i know, i don't ask for free solution, i know that it's a new manual solution and need to be paid. My friend pike did it for me. i'm testing