DM500 setanta

[jonnboy]

Hi guys, seem to have a problem with these channels.
watch for 5mins or so then either freezes or says no service, ive rescaned then picks up the channels again works ok for awhile then same problem.
i have looked in bics for the channels ,nothing there.(says no service in the bics ,no pictures at all.)
ive bought a attenuator 6db still no joy.
the signal says 92-94 varies.:
sorry for the long post .
help thanks Jon.

[Mordor1946]

not much help mate...but I get exactly the same problem...

[Knockoff_Nigel]

Sometimes freezing issues can be resolved by using a different cam. For example if you are currently using evocamd then try mgcamd etc etc. The AU codes in use can also be changed manually to try and get the best mix of both for your box and image.

Are you using Lincsat`s image by any chance?


EDIT : SORRY I THOUGHT THIS WAS A DBOX QUESTION.

[jonnboy]

Sometimes freezing issues can be resolved by using a different cam. For example if you are currently using evocamd then try mgcamd etc etc. The AU codes in use can also be changed manually to try and get the best mix of both for your box and image.

Are you using Lincsat`s image by any chance?


EDIT : SORRY I THOUGHT THIS WAS A DBOX QUESTION.

not really sure how to change the cam, do you have to reflash the box.
thanks Jon

[Mordor1946]

cam change

I'm also intereted in how this is done...and whether its applicable to a dreambox or only dbox