D600 no lock

[mcrabb85]

I have just recieved new D600 on cable up put on Pli image and do a transponder scan it comes back with an error saying could not get a lock any ides.

Thanks

[jckw]

wot area u in and wot frequency u scanning

[mcrabb85]

ex c@w and I only get the option to scan All when if finshs scanning it coms back with a message all known transponders have been tried but no lock was possible.

[shady77]

silly question, but you have got a live feed i take it?

[mcrabb85]

I already have a DM500 working perfectly just can't get the 600 to see anything on the same connaction.

[MILLWALLFC]

Have you copied over the cables.xml file to the box ?

[mcrabb85]

No I have not use to DM500 any idea where I get it from and is there an idiots guide to setting up a DM600 on cable.

Thanks

[MILLWALLFC]

Download an FTP program like filezilla.

On the Dremabox 600, go to Menu, Setup, System Settings, Network, i give my box an IP Address 196.168.1.103 you can just set it to DHCP.

I am assuming you have a cross over cable if you are pluging stright into Dreambox or if you have a Cat5 cable you are going through a router.

FTP to

ftp://192.168.1.103
Install keys here:- ftp://192.168.1.103/usr/keys/

Install SCCE Keys here:- ftp://192.168.1.103/etc/tuxbox/scce/

In FTP install the cables.xml file in the following location:- \\192.168.1.103\Configuration\tuxbox

You can now scan for channels in tranponders

You now need to install the Evoccam, got o a TV channel press blue and go to the software install and install cam.

Now in more less same section ensure you activate the Evocam for premium channels go to Sly Sports and wait 10 seconds and all will work.

All files in my documents and then FLASH.

If you send an email address i will send you the files you will need.

[loncell]

im stuck with my dm600.i've flashed it with jade PLi and ftp'ed across the latest roms and bruteforced scanned.then i used the blue button and downloaded evocam 2.13.i then set up evocam to boot but i still only get FTA , am i doing something wrong ?.im getting a signal in yellow bar when i select say a sports channel but no picture.totally baffled me this one.
and sorry 1 more thing , in "softcam setup" ., o i selected evocam 2.13 for the channel /provider / default softcam.does the cardserver box remain as "none" ? as i dont have anything in there to select.

[Curious123]

Have you left it on S*y Sp1 until it clears?

[loncell]

yeah m8 , left it for 20 mins still nothing ,,,the bitrate viewer even says its so called pumping through but no pic ,,,wierd one.

"and sorry 1 more thing , in "softcam setup" ., o i selected evocam 2.13 for the channel /provider / default softcam.does the cardserver box remain as "none" ? as i dont have anything in there to select. "