nabilosat pure flash dreambox 7025

[thered]

Nabilosat DM7025 Pure Flash 29DEC08, with Barry Allen 4.6.52



RapidShare: Easy Filehosting




What is the Nabilosat DM7025 Pure Flash ?
This image is a simple, pure CVS image to install to flash memory. It is reccomended to those who like the multiboot option with Barry Allen. It is light, fast, reliable and, most of all, upated. Therefore, it is the best solution for multiboot purposes.

What is included in this image ?

This image is including the latest available edition of Barry Allen: 4.6.52

Why should I install this image in flash ?

Because it includes all the latest drivers and kernel modules required to install new images in multiboot. Nabilosat team is about to release version 0.6 of its Black Hole image. If installed to multiboot, the new Black Hole v0.6 requires an updated image in the flash memory. For this reason, Nabilosat team prepared this Pure version for you.

How do I install Barry Allen with this image ?

Barry Allen will be automatically installed at the end of the default wizard

Will I loose the images already installed on my media ?

No, you will not loose any of your favourite images, already installed to your media. You will reboot and find them again, ready to be used.

How do I install it to flash ?

You can install it via WebInterface or via serial. However, it is important that you read the simple instructions reported here under.

Release Details

NEW Nabilosat Bootlogo by MaximoII

Barry Allen 4.6.52 included
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm7025"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"
COMPILED DATE = "26 december 2008"
ENIGMA2_CVS_DATE = "26 december 2008"
ENIGMA2_VERSION = "2.6 experimental"
DRIVERS = "25 October 2008"
SECOND STAGE = "61"
BARRY_ALLEN_VERSION = "4.6.52"



Instructions

1) Flash your DM 7025 with Web Interface or DreamUp and serial cable
2) Complete the Default Wizard to setup the basic steps
3) Upon Wizard completion, you will be prompted to press OK to install Barry Allen
4) Press OK once, and wait for the Wizard to install Barry Allen
5) When Barry Allen is updated, the Default Wizard will be completed.
6) Reboot your Dreambox


thanks elgeneral

[barc]

Hi
IVe installed the software gone through the wizard but it did not offer choice to install barry allen it went straight to all pro sat fav
what have i done wrong

[westkill]

Hi
IVe installed the software gone through the wizard but it did not offer choice to install barry allen it went straight to all pro sat fav
what have i done wrong

once this is in the flash press hold blue button for barry allen option i think

[westkill]

did you have barryallen installed before you put Nabilosat DM7025 Pure Flash image on your box
then you can add say nabilosat v0.6to the mb_images were ever it is on your hdd or cf card
if so goto the the barry allen option in pure flash image extract image then image is ready for booting

[barc]

no i didnt the instructions said after i finished installing via wizard it would then give me the choice

[thered]

is barryallan not installed into your plugin menu already

[barc]

no it is not there
i will try reloading

[thered]

if you still have problems just ftp it too temp then do manual install

[DIODE321]

Hi

I have recently got a 7025+ and I am not too hot with networking etc.

Is it possible to just put a compatible 7025 image file onto a compact flash card, turn the dreambox on with the compact flash in and the box boot from the CF rather than its on-board firmware? I am guessing the answer is no but was just hoping.....

Thanks for any help.
Diode

[westkill]

todo what you said you still need barry allen running to extract the image
or just flash with dreamup

[DIODE321]

todo what you said you still need barry allen running to extract the image
or just flash with dreamup

Forgive my ignorance, but I assume that means I need to get my Dreambox to network with my laptop/pc and router? As long as I know that; then that is my first challenge to getting this thing set up. I think I might be depending on you folks for a few months yet......

Thanks
DIODE

[westkill]

here are the two ways 2 flash the dm7025
Dream-Multimedia-Tv GmbH