500C missing channels

[timgaunt]

Ok, I've just had an update on what he can view (or more to the point what he can't! The channels that are "found" but when used say "Channel Not Found" (or similar) are:

• Sky Sports
• Music Channels
• Santana sports
• Movie Channels

Is this something to do with the keys? I uploaded the keys from the n00b's guide via FTP so I thought they'd be there. I did notice this post on another site [Removed For Now] -do I need to do something with that?

Have I missed something or am I just being dumb?

Tim

[shady77]

can you view any payed for channels?

[timgaunt]

I don't beleive so

[shady77]

you may need the updated keys.
RapidShare: Easy Filehosting
delets all the roms in var/scee and transfer these new ones across. come back and tell us how you got on.
i really need to edit that guide

[timgaunt]

Thanks Shaddy I'll give it a go.

It might be useful if you overview what the ROMs/Keys are for as that's something that I'm still not clear on

Thanks to you all for your help so far.

Tim

[shady77]

well im going to do a video guide a bit later for the 500c and hopefully, that will be of more use than the outdated guide.
good luck mate
btw after you have transferred the new roms, reboot box and go to sky sports 1. press and hold "info" for about 3 secs, start cam and then wait for a few mins. channels chould clear. while youve got dremabox connected to router, it might be a good idea to update the cam by pressing
YELLOW>MANAGER SUITE>ADDON MANAGER>SERVER: DK ADDONS>CAMS>EVOVAMD 2.17C THEN PRESS BLUE FOR INSTALLATION. TO START USING THIS CAM, PRESS AND HOLD INFO, THEN PRESS LEFT OR RIGHT IN THE YELLOW HIGHLIGHTED BOX.

[C64]

You might want to remove your link to that other forum before Admin or Mods see it mate.

[timgaunt]

Thanks Shaddy I'll do as you advise and will report back later (hopefully with some hair left!)

Will update the link ta.

Tim

[timgaunt]

WOOHOO! Result, I've just got back and although it didn't work to start with, for some reason "it just started to" after setting the CAM back to the old version and then to 2.1.7c again.

Thanks for all the pointers.

Tim

[shady77]

glad you're sorted buddy.