Connect pc to dreambox to run FlashFXP

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kevin4344
    Junior Member
    • Jan 2009
    • 20

    #1

    Connect pc to dreambox to run FlashFXP

    Got great help on this site so i feel its my duty to help fellow noobs.


    I connected my router to dreambox via a "Patch Cable".
    This is readily available in any computer shop.
    Plugs into backs of both router and dreambox
    ----------------------------------------
    I went into the dreamboxbox
    Menu > Setup > Expert Setup > Communication SetupMenu

    enabled DHCP
    set nameserver to all zeros'
    put in my gateway addresss

    (gateway address got by going to start run "cmd"
    enter "config\ all" with out the asterix
    all info you require here)

    left everything else the same.
    rebooted the box by unplugging.
    plugged box back in.
    went back to
    Menu > Setup > Expert Setup > Communication Setup
    and the dhcp allocated a ip address. this is the ip address at the top.Write this down,

    ---------------------------------
    Go to your PC
    start Menu > control panel > Network Conections > Local area conection .
    right click and go into properties.
    Select Internet Connection(tcp\ip)
    Go into properties

    change option one to use the following address
    If your dreambox ip address( the one you wrote down ) is 192.168.1.8
    then enter 192.168.1.7 in the box provided ( I less than your dreambox)
    mask 255.255.255.0
    enter your gateway address in box provided.

    option 2 changed automatically - leave these blank
    --------------------------------------
    This is what my settings looked like


    PC setting:


    Use the following IP address:is ticked
    ip address192.168.1.7
    mask 255.255.255.0
    GATEWAY ADDRESS :192.168.1.254
    ????: Digital Kaos http://www.digital-kaos.co.uk/forums...address-26259/


    Use the following dns server address: is ticked
    these are blank


    Dreambox settings:

    1p : 192.168.1.8
    DHCP: DISABLED
    mask: 255.255.255.0
    type: lan
    nameserver: 0.0.0.0
    gateway :192.168.1.254
    network :enabled
    port 80
    -----------------------------------

    THe above worked for me.

    open flashftp

    Go to the lightening strike at the top
    and select "Quick connect"

    A page appears:




    flash ftp settings:

    url:192.168.1.8 (Use your own dreambox ip )
    Then use the following:
    username: root
    password:dreambox

    click connect:
    files from your dreambox should appear.



    hope this helps

    kevin4344


    My thanks to Devilfish' , thommos and Mubz tutorials for withch i am truly gratefull
    Last edited by kevin4344; 19 January, 2009, 00:45.
  • thomo76
    Newbie
    • Jan 2009
    • 8

    #2
    re

    What is a patch lead?

    Ethernet or Cross over cable Mate?

    Thanks for great insight just what i am after.

    Thommo76

    Comment

    • Devilfish
      Administrator
      • Feb 2008
      • 7872

      #3
      A patch cable is another name for a normal ethernet cable.

      Category 5 cable - Wikipedia, the free encyclopedia

      Comment

      • tweesby
        Newbie
        • Jan 2009
        • 1

        #4
        thans for this great guide

        Comment

        Working...