E2 SGSH online bouquets updater plugin for sg

[Agallivant]

hi agallivant your 226-228 scanned from 135 is watchable? I rescan with 135 found signal is stable during scanning but channels still unwatchable.. freeze,distortion,etc.. same as what I have since scanned 135.5 few days ago

Yes, they are crystal clear.

226 is the split screen showing Mio channels 102/103/104/105 (attached).

227 and 228 are showing Tottenham vs Arsenal right now at 5:00pm.

1024x768.jpg

[gray723]

226 to 228 tune failed after updates.

[Agallivant]

Hello moronicgenius,

If you are using a FYHD or MYHD box, you will not get the new clean channels from 135.00 MHz at channel slots 226-228, because these slots are already taken by your earlier scan at 135.50 MHz. They will be pushed all the way to the back at channels 900+ or 1000+.

You can try deleting channels 226-228 manually first before retrying 135.00 MHz.

hi agallivant your 226-228 scanned from 135 is watchable? I rescan with 135 found signal is stable during
scanning but channels still unwatchable.. freeze,distortion,etc.. same as what I have since scanned 135.5 few days ago

[moronicgenius]

thanks bro! I got all 226~228 now. u r rite they were actually at 900s channel after rescanning @ 135. pic quality is good but got occasional freeze still. it will run smoothly for a few sec den next few sec freeze every 1 sec or so. abit annoying. I change the frequency from135.6 to 134.9 only 135 signal is stable the rest fluctuate quite a fair bit. hope this help the rest of bros who have problem getting it.

Hello moronicgenius,

If you are using a FYHD or MYHD box, you will not get the new clean channels from 135.00 MHz at channel slots 226-228, because these slots are already taken by your earlier scan at 135.50 MHz. They will be pushed all the way to the back at channels 900+ or 1000+.

You can try deleting channels 226-228 manually first before retrying 135.00 MHz.

[mq2012]

After update 226-228 tune failed.

[uu161]

ok noted i will swtich it back btw those tuner fail which model of box are u using?




switched back to 135.5 some bro got tuner fail hmmm

[croc]

how to delete channels is fyhd?

[mq2012]

DM800HD. Thanks

[uu161]

DM800HD. Thanks

bro can help?
need someone to update again test 226 to 228 if is using 136.00?


my guess if using different tunner card got different
example like am using LG tunner card 135.00 to 135.50 works but not 136.00
i still have the clone tunner card but Co watch tv hard for me to test

[mq2012]

Bro still same problem!

[uu161]

Bro still same problem!

so only 135.50 works?

i have changed all back to 135.50

[mq2012]

seem like mine only previous 135.5 work.

[uu161]

seem like mine only previous 135.5 work.

thank you for helping

ok stick 135.50


u test again should be working again

[ronny1]

Hello moronicgenius,

If you are using a FYHD or MYHD box, you will not get the new clean channels from 135.00 MHz at channel slots 226-228, because these slots are already taken by your earlier scan at 135.50 MHz. They will be pushed all the way to the back at channels 900+ or 1000+.

You can try deleting channels 226-228 manually first before retrying 135.00 MHz.

harlow brother.
im using fyhd 800c vii black boxes different from mvhd.
your tips on the 900+ channel was awesome. But hor its abit different.
i scan 128.5 get 229 230 231 no problem ^^
but i scan 149.5, get signal but never appear in 232, 233. Thats where i try to look for it at 900+ channel and saw it at 1000+ so thank you much ah! hehe.
But you guys were talking about signal 135.5 where the channel will move to 900+, but for me hor, i scan 135.5, 134.9 136 all the freq you all mention, i couldnt get the 135.5 freq to appear

[Agallivant]

MENU > Edit Channel > TV Channel List > *scroll up/down to channel* > Edit > Delete > Delete > Ok to confirm

how to delete channels is fyhd?