If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Yes, that's in fact right: DreamUp must not be installed to execute it. Perhaps it might be run
right from the USB stick containing the image to flash.
Hi, I m trying to flash my dm600pvr..got it flashed with dreambox-image-dm600pvr-20120108020416.nfi..no problem..just wondering how to configure it? Any help will be much appreciated..thanx in advance
if you are using a usb adaptor to connect the box to your computer then you need to install a suitable driver in your computer , very simply simply put the driver is a bit of software that lets the computer see and communicate with the box . so without a driver the computer will see the box as such but wont be able to communicate with it , and then dcc will not connect .
hi your asking a question (or atleast it seems you are ) that involves a discussion that would be against forum rules . if you want send me a pm with your questions and ill see if I can answer them , that way no one breaks any rules .
if you are using a usb adaptor to connect the box to your computer then you need to install a suitable driver in your computer , very simply simply put the driver is a bit of software that lets the computer see and communicate with the box . so without a driver the computer will see the box as such but wont be able to communicate with it , and then dcc will not connect .
Oh i see. So where can i get the driver? Because when i purchase the cable it doenst come with any CD
you may be able to download a suitable driver here on digital kaos or someone may upload one for you . or you could look at your usb adaptor for the model name and number , then type the name and model number followed by the words driver download into google and you should get download options . the just download it , after that go to where you downloaded the file in your pc and open and install it . with luck your computer should then see the box and connect ok . talk soon
Comment