Adding Sky Box Office Sports to Dreambox using Manual Scan

[mab88]

i cant get it if done all regarding adding SBO manually I tried everything but it never worked anyone know why im a ex t/w

[X-PAC]

ive still got problems with this, i was up til 2am last night with no luck, i get the splash screen for the wwe event but the event doesnt actually show. I have dbox2 and that does show the event. Ive tried all the settings but no luck. Can i transfer the channel from dbox2 to dreambox?Or could i somehow view the settings for the channel through dbox and copy them to my dreambox. thanks

[Devilfish]

I've just deleted my sbo channel and the relevant bouquet entry and went through this guide again from start to finish (ex-tw).

It still works fine and it's showing WWE.

So make sure you are entering the correct values in each of the boxes.

[mols0n]

Hi,
I can confirm Devilfish's last post. I am in the Wirral/Cheshire area and being ex c/w 6952 but the only difference is the Frequency. I use 627 for frequency and follow all the original posts settings. If your quick I think there still showing WWE repeats.

[Devilfish]

You don't enter a frequency, it's only the transponder id (TSID) and service id that you need to enter.

[GGM]

Is there anything on SBO now? The EPG on the Live events channel says 'Watch Live Events Here' from 10pm

I'm in Liverpool ex TW (I think?!?!?) and thought I'd add SBO but just get a blank screen. I'll try again after 10pm but hoped that there may be trailers running now.

[jbennett1974]

anway of doing this on a DM800 as cant find how you would put all the information in as does not give you the option to add pids and stuff

[Devilfish]

It should let you enter pids if you go to the manual transponder scan page then press yellow.

There was wwe on this afternoon. My channel doesn't have any epg.

[GGM]

Have tried again! Now after 10pm when I think there should be something on SBO? But still no luck!

[GGM]

....one more thing, after putting the settings in from post 1, I then looked at the stream info for the blank SBO channel and could see all the values I entered, however the TSID had changed from 7H to 9H (Ex TW). Any ideas?

[jbennett1974]

It should let you enter pids if you go to the manual transponder scan page then press yellow.

Have tried looking everywhere but no way of entering pids as far as i can see on the DM800

[harry1986]

I Have got Sky Box Office i followed what Devilfish did by deleting the channel and following the setup progress again and it worked and im watching Wwe now thanks to Devilfish all credits go to him

[Devilfish]

Credit goes to everyone on the forum who helps out! It's not a one man band!

Share the knowledge!

[GGM]

Is it possible that the reason I can't get this to work, down to the image and/or CAM? I'm using the latest release of Pli-Jade with Evocamd 2.17b.

Is anyone else using this combination?

[Devilfish]

I'm using DK v1.1 with evocamd v2.12.

I wouldn't have thought the emu would have anything to do with it. The bit of code in v2.12 is the same bit of code that's in v2.17b (and every other version after 2.12 for that matter). We use nagra1 in the UK. The nagra1 code is the same in each version. So why use a version that's cluttered with loads of other encryption hacks that are of no use to us. Larger file taking up more room in var, more code which might cause it to be unstable, etc. Sorry, going a wee bit off topic here.

Post a screen shot of the two pages with the settings that you're using.