Dreambox Repair Services

[picorat]

Hi guys,

I came across 2 old sets of DM500C which is no longer working, and am wondering if anyone out there knows if there is a repair service available for the dreamboxes in s.g.?

would appreciate if someone can point me in the right direction.

Thank you!

[ypvs125]

Hi guys,

I came across 2 old sets of DM500C which is no longer working, and am wondering if anyone out there knows if there is a repair service available for the dreamboxes in s.g.?

would appreciate if someone can point me in the right direction.

Thank you!

If it is worth repairing, then u would not came across these 2 sets of dm500c which is no longer working. Btw, is it yr set and how do u differentiate between working and non working set?

[Bomchacha]

Last time, Davjones at Sim Lim Tower Basement has someone who can repair DVB
But seems like that place has quieten down and stayed low profile. The last I was told the repairman went back china liao

[Bomchacha]

***19978;***20256;***22270;***29255;***30340;***32 593;***31449;

[ronildoq]

Hi experts, i wanted to know if i can get my DM800hd se repaired too? the problem with my set is the HDMI connection at the back of the box. everytime i have to push the cable upwards to get a signal. The whole issue started when i used a thick hdmi cable which was heavy and over time, caused the HDMI connection at the back to tilt. then suddenly signal is lost and now i have to adjust and add something to push it back upwards. tried to solder but to no avail. I believe the HDMI pins in it are probably disjointed. Anyway i can repair or replace the hdmi port at the back of the box?

Thanks

[jatrophaseed]

HDMI connections hv only 19pin, use a pointed solder bit, no apply solder but lots of liquid flux, jux touch every pin lightly, the connections sud b connected. Remember, no solder unless yr soldering skill is accepted to b GOOD.

[ronildoq]

HDMI connections hv only 19pin, use a pointed solder bit, no apply solder but lots of liquid flux, jux touch every pin lightly, the connections sud b connected. Remember, no solder unless yr soldering skill is accepted to b GOOD.

thanks but am not a soldering expert, looks like gotta send it back to the supplier..... oh no..............gotta be spending on postage again...