DM800HD se

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Alvan
    Newbie
    • Aug 2013
    • 6

    #16
    is there anything i can do for this fake box that runs MSTARDEMO??

    Comment

    • toysoft
      DK Veteran
      • Nov 2008
      • 752

      #17
      Open the box, and take a photo of the motherboard, and post here, so we can take a look at it.

      But I am suspicious that it can run Enigma2 software,

      TS

      Originally posted by Alvan
      is there anything i can do for this fake box that runs MSTARDEMO??

      Comment

      • bauer24
        Newbie
        • Jun 2012
        • 4

        #18
        Hi guys,thought I'd use an old thread to seek help here.

        Can anyone advise on fixing/changing/setting the frequency on a C tuner?

        My DM800SE has trouble picking up certain channels (and only certain channels) in Singapore apparently because the signal stream is unstable, according to a friend, and the tuner isn't dynamic in picking up ranges of frequency.

        I tried asking for a change in tuner but was told it makes no difference so thought I seek help here.

        Thanks!

        Comment

        • laksapopiah
          Banned
          • Jan 2015
          • 70

          #19
          Originally posted by bauer24
          Hi guys,thought I'd use an old thread to seek help here.

          Can anyone advise on fixing/changing/setting the frequency on a C tuner?

          My DM800SE has trouble picking up certain channels (and only certain channels) in Singapore apparently because the signal stream is unstable, according to a friend, and the tuner isn't dynamic in picking up ranges of frequency.

          I tried asking for a change in tuner but was told it makes no difference so thought I seek help here.

          Thanks!
          Half-Frequencies on SymRate 6090.
          135.50, 127.50, 148.50, etc..

          Some tweak necessary. example 135.50, u could use either 135 or 136MHz. Trial and Error..

          Motherboard revision and DVB Tuner must be compatible..
          Last edited by laksapopiah; 26 April, 2017, 14:10.

          Comment

          Working...